1
Download TraceFinder 3.2 User Guide Optimized for
Transcript
8 Using the Analysis Mode Working in Data Review for Quantitation Methods Table 97. Common parameters for Compound Results and Sample Results tables (Sheet 7 of 7) Column Description Sample Amt The injected volume multiplied by the conversion factor. For example, if you have 1000 ng/mL of a substance that is too concentrated for the mass spectrometer, you can dilute it by 1000. Then your injection volume is 1, your conversion factor is 1000, and your sample amount is 1000. Sample Type Defines how the TraceFinder application processes the sample data. Each sample is classified as one of the following sample types: Specimen, QC, Solvent, Calibrator, Hydrolysis, Unextracted, or Negative. Status Status indicators for each sample indicate if the sample is currently acquiring, not acquired, acquired, or processed. Sample is not acquired. Sample is acquired but not processed. Sample is acquired and processed. Sample is currently acquiring. Theoretical Amt Theoretical amount of the compound expected in the sample. Excluded Turns a compound on or off in the calibration curve in the Compound Details pane. Thermo Scientific TraceFinder User Guide 465
