1
Download User's Guide - Allied Telesis
Transcript
AT-S62 User’s Guide Displaying Port Security Levels To view the current security levels for the ports on the switch, do the following: 1. From the Main Menu, type 1 to select Port Configuration. 2. From the Port Configuration menu, type 5 to select Port Security. The Port Security menu is shown in Figure 149 on page 458. 3. From the Port Security menu, type 2 to select Display Port Security. The Display Port Security menu is shown in Figure 152. Allied Telesyn Ethernet Switch AT-8524M - AT-S62 Production Switch User: Manager 11:20:02 02-Jan-2004 Display Port Security Port Security Mode Threshold Intruder Action Participating ---------------------------------------------------------------1 Limited 6 Trap Yes 2 Limited 10 Trap Yes 3 Automatic ---------4 Locked --Discard No 5 Automatic ---------6 Automatic ---------7 Automatic ---------8 Secured --Discard No N - Next Page U - Update Display R - Return to Previous Menu Enter your selection? Figure 152 Display Port Security Menu This menu is for viewing purposes only. The columns in the menu are defined below: Port The number of the port. Security Mode The active security mode on the port. Threshold This column specifies the maximum number of dynamic MAC addresses the port will learn. It only applies when a port is operating in the Limited security mode. Section VI: Port Security 461
