Download Kontron User's Guide
Transcript
24 Appendix B: BIOS Operation Start Phoenix BIOS Setup Utility To start the Phoenix BIOS Setup Utility, press the <F2> key when the following string appears during boot-up. Press <F2> to enter Setup The Main Menu then appears. 24.2.1 General Information The Setup Screen is composed of several sections: Setup Screen Location Function Menu Bar Legend Bar Item Specific Help Window Menu Window General Help Window Top Bottom Right Left Center Overlay (center) Lists and selects all top-level menus. Lists setup navigation keys. Help for selected item. Selection fields for current menu. Help for selected menu. Menu Bar The menu bar at the top of the window lists different menus. Use the left/right arrow keys to make a selection. Legend Bar Use the keys listed in the legend bar on the bottom to make your selections or exit the current menu. The table below describes the legend keys and their alternates. Key Function <F1> or <Alt-H> <Esc> ← or → Arrow key General Help window. Exit menu. Select a menu. ↑ or ↓ Arrow key <Tab> or <Shift-Tab> <Home> or <End> <PgUp> or <PgDn> <F5> or <-> <F6> or <+> or <Space> <F9> <F10> <Enter> <Alt-R> Select fields in current menu. Cycle cursor up and down. Move cursor to top or bottom of current window. Move cursor to next or previous page. Select previous value for the current field. Select next value for the current field. Load the default configuration values for this menu. Save and exit. Execute command or select submenu. Refresh screen. Selecting an Item Use the ↑ or ↓ key to move the cursor to the field you want. Then use the + and - keys to select a value for that field. Save Value commands in the Exit menu save the values displayed in all menus. Kontron User's Guide EPIC/CE 68