Download CERN UNIX User Guide
Transcript
85 < w <= 200: formatter a2ps, landscape orientation, font size chosen so that either w or w+1 columns fit on a line. Lines longer than w (or w+1) are folded. Some values of ’w’ less than 40 are used for special purposes: w=2: w=4: w=5: default, see above formatter ascii2ps, a4 portrait orientation, 1 1 pt. font with long lines folded, no frames, headers, or page numbers, just plain text. formatter a2ps, a4 portrait orientation, 6.8 pt. font, supporting lines up to 122 characters. Some options that are available using lpr are listed below but remember that most of these are not available when listing postscript files, see the later section on LATEX for more information about this. -l -f -s -x -#num -wnum -znum 5.6.2 for control characters and suppressing page breaks. this option interprets the first character of a line as a standard Fortran control character. for printing large files, (these files are softlinked to the spool and not written there. Do not modify files sent via this method until printing is complete). No filtering, file printed verbatim. Number of copies required. Maximum page width Maximum page length Some Useful Unix Print Functions Unix has a number of associated print functions which you may find useful. For a more comprehensive list and explanation of these functions the appropriate man page should be consulted. lpq and lprm are both Unix BSD commands, their equivalent in Unix System V are lpstat and cancel respectively. The commands to apply depend on the system in use: OSF AIX Ultrix HP/UX lpq lprm BSD and System V BSD and System V BSD System V Typing this command at the prompt will initiate an examination of the spooling areas used by lpd for printing files on the printer, and report on the status of jobs in the queue. The print queue can be examined in its entirity, or by individual users or by printer (-P option) or jobs - see “man pages” on page 69 for more details. This command can be used to remove a job or jobs from the printer’s spool queue. As the spooling directory is protected from users, using lprm is normally the only method of removing a job. You can remove jobs currently active, by job number or all jobs owned 49