Download EchoView User's Guide

EchoView User’s Guide
14 Appendix B: PowerPak External
Battery Replacement
Warning: Only remove the
external battery adapter in nonhazardous locations
Note: For clarity,
EchoView’s
optional stainless-steel
enclosure is not shown.
Adapter
Sensor and battery
removal tool
(P/N 019-2044-000)
3-pin end
Hexagonal end
14.1 External Battery Usage
An external battery unit, the RAE Systems RAE PowerPak, is used to power a
EchoView in fixed installations or in situations where extended battery life is
necessary. The connector from the external battery screws into the
EchoView’s battery compartment. Bottom views of the EchoView in its steel
enclosure are shown in the procedure below.
1. Remove battery cover with the 3-pin end of the sensor and
battery removal tool by turning counterclockwise.
51