Download Compound Discoverer 1.0 User Guide Version A

4 Reviewing the Analysis Results
Using Result Filters for Data Reduction
Result Filters View
Use the Result Filters view to create data reduction filters for one or more master tables in a
result file. The Result Filters view is a floating window that can remain open while you work
in other areas of the Compound Discoverer application.
Table 64 describes the panes and buttons in the Result Filters view.
Table 64. Result Filters panes and buttons
Feature
Description
Left pane
Lists the master tables included in the current result file. An On/Off button and an
indicator icon appear to the left of the table name.
ON/OFF button
Use to turn on or turn off the conditions for the associated master
table.
Indicator icons
The indicator icon states are as follows:
• (
) Gray—Indicates that the table is unfiltered.
• (
) Green—Indicates that a filter has been applied to the table.
• (
) Yellow—Indicates that the table filter is OFF.
• ( ) Red—Indicates that the current result file does not contain
the associated master table.
Right pane
Displays the filter settings for the selected master table. You can modify these settings as
described in “To set up a set of filter conditions with one or more properties” on page 237.
AND or OR
Specifies the logical connection between properties or groups.
Add Group
Adds a group.
Add Property
Adds a property.
Buttons
Thermo Scientific
Load
Opens the Load Filter Set dialog box where you can select a saved
filter set and open it.
Save
If a saved filter set is open, clicking Save overwrites the settings in the
file with the current filter conditions in the Result Filters window.
Save As
Opens the Save Filter dialog box where you can define the file name
and select a folder for a FILTERSET file.
Clear All
Clears all of the filter conditions for the current filter set.
Clear
Clears the current filter condition.
Apply Filters
Applies all of the filter conditions for the current filter set.
Compound Discoverer User Guide
245