Download Wavelink TelnetCE Client User's Guide

Chapter 10: Manually Configuring the TelnetCE Client
Stop
185
Indicates the number of stop bits that the serial
connectiont to the printer uses.
Possible Values: <1> <2>
Default Value: <1>
Wakeup
Indicates the string of characters that the mobile
device sends to the printer as a wakeup. You can
represent the wakeup string as an ASCII or hex
value.
• Hex Value. Type the hex values of the
characters that you want the mobile device to
send to the printer. For example, 0000 sends
two nulls to the printer.
• ASCII Value. Use “<>” to enclose ASCII hex
values. For example, <00> <00> sends two
nulls to the printer.
Possible Values: Any valid wakeup string
Default Value: <None>
Hardware Flow Control Indicates whether the serial connection to the printer
uses hardware flow control.
Possible Values: <Enabled> <Disabled>
Default Value: <Disabled>
Software Flow Control
Indicates whether the serial connection to the printer
uses software flow control.
Possible Values: <Enabled> <Disabled>
Default Value: <Disabled>