Download STiC2 User Guide

Step by step
20
Figure 4.2.: The SDK main window. Buttons and menus that are being used, are marked.
(a)
(b)
(c)
Figure 4.3.: SDK import menus. (a) general option (b) browse window (c) folder selection menu.
Right click on each of the folder (total of 3) and select clean project (see Figure 4.4).
We need to choose the IP address for the FPGA. In the Project Explorer go to the file main.cc
in mblaze top→src. You can define the IP in lines 111-113 (default value 192.168.0.2).
Now let’s build the project:
Right click on standalone bsp 0→build project.
build the same way mblaze top.