Download STiC2 User Guide

What’s in the package
3
Figure 1.1.: The different package components. The numeration corresponds to the list in the text.
• linux machine with Debian 6.0 or newer version (recommended version 7.0, gtk+3.0
already embedded)
• ISE design suite - Xilinx, for using SDK kit 14.5 build SDK P.58f
(download from http://www.xilinx.com/products/design-tools/ise-design-suite/)
If you are using older version you may need to install digilent adept/plugin for xilinx.
The package can be found in digilent website:
Digilent Adept runtime and utility:
http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,66,828&Prod=ADEPT2
Digilent Plugin for Xilinx Tools:
http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,66,768&Prod=DIGILENT-PLUGIN
• ROOT version 5.34/00, used for building the output data, online monitoring and analysis
can be download from http://root.cern.ch/drupal/
These are the recommended requirements, if using different versions, the software package
will need to recompile. In addition also the user will need a HUB switch for connecting the
FPGA and the PC to the same network. The recommended HUB is DES-1008D from D-Link.
Before starting please check the all the above system requirements are fulfilled!