Download Troubleshooting - About JustAnswer

Main Menu
Table of Contents
From page 24-50
Check for an open in the SRS main harness:
1. Disconnect the battery negative cable, then disconnect
the positive cable, and wait for three minutes.
2. Disconnect the driver's airbag 2P connector f r o m the
cable reel 2P connector (see page 24-11).
3. Disconnect the S R S main harness 18P connector f r o m
the SRS unit. D o not disconnect the special tool
from the SRS main harness 2P connector.
4. Check resistance between the No. 10 terminal and No. 14
terminal of the S R S main harness 18P connector. There
should be approx. 2.0 - 3.0