1
Download Operating instructions/component parts
Transcript
Connecting track sections CAUTION Incorrect assembly Incorrect assembly of the rails is dangerous. – 5.7.6.2 The track sections must be bolted together in such a way that there are no shoulders on the running sur‐ face or on the sides of the opening at the track joints. There must be no resistance when a trolley is pushed across the joint. Track section bolted joint Fig. 23 Item a Designation Profile Item Designation Item Designation Item b Bolting plate c Hexagon bolt d Designation Slot nut Tab. 19 Tools needed Profile section size: KBK Aluline Wrench A12 and A16 A18 and A22 SW 13 (open or ring type) SW 15 (open or ring type) Tab. 20 – Slide slot nuts (d) into profile sections (a). – Connect the profile sections to each other by means of bolting plates (b) and hexagon bolts (c). Position bolt‐ ing plates (b) so that they are centred on the joint. – Tighten bolts (c) to the correct tightening torque: Aluline A12 and A16: 45 Nm 211 259 44/110414 Aluline A18 and A22: 85 Nm. 39
