Download Installation and Operating Instructions

Technical Specifications
Housing
Height
Width
Depth
Weight
Potential equalisation
Earthing
IP protection category
LED display
Temperature range in
operation
Humidity range in operation
Storage temperature range
Voltage connection:
Power supply
Fuses
Power input
Detector connection
Plastic covering with metal trim piece
1 U, approx. 4.45 cm
approx. 13.6 cm
approx. 12.9 cm
approx. 0.35 kg without packaging
Not required, because 24 VDC protective low voltage
Not required, because 24 VDC protective low voltage
IP 40 to EN 60529
blue / white, 122 x 23 Pixels
+5 °C to 45 °C / +41 °F to 113 °F
5% to 95% relative humidity, non-condensing
-20 °C to 60 °C / -4 °F to 140 °F
1x, DC 24 V, max. current 3 A SELV
Fine fuse: T 3 A, 250 V, UL approval
50 mA
1x, RJ12 sockets, shielded
Installation Instructions
The Rittal CMC-TC Display Unit II must be installed in an enclosure or housing
system that provides additional protection from external influences. The cable lengths
must not exceed the lengths given in the technical specifications in order to avoid
losses due to unnecessary lengths of cables. Attention must be paid to maintaining
the permitted ambient temperature and humidity ranges, as well as the IP protection
category as required for the specific application. The appropriate information is
contained in the technical specifications (page 7).
7 / 17