Download OPERATING INSTRUCTIONS ELECTRONIC LOW

9.2.3.3
Pressure holding phase. .................................................................................... 45
9.2.3.4
Open the machine.............................................................................................. 46
9.2.3.5
Pressure control. ................................................................................................ 47
9.2.3.6
Pressure compensation. .................................................................................... 47
9.2.4
Parametrisation of the cooling zones. ....................................................................... 49
9.2.4.1
Switching on the cooling zone. .......................................................................... 50
9.2.4.2
Time-controlled cooling zone. ............................................................................ 51
9.2.4.3
Temperature-controlled cooling zone. ............................................................... 52
9.2.4.4
Cooling zone with proportional valves ............................................................... 53
9.2.5
Definition of the temperature-monitoring parameters. ............................................... 55
9.2.6
Mould and machine parameters................................................................................ 57
9.2.7
Management of casting control programs. ................................................................ 59
Page 3 of 60