Download OPERATING INSTRUCTIONS ELECTRONIC LOW

9.2.4.2 Time-controlled cooling zone.
1
2
The ON and continuous time of cooling for air/water cooling circuits is to be set.
Parameter entry starts with a click in the top area (1) for the air cooling circuit and in the
bottom area (2) for the water cooling circuit. A number pad is shown. Here, the delay time of
the cooling zone and, in the 1st and 2nd number block, the cooling time can be entered.
Accept the entry by clicking "Enter". The cooling zone can then be left and the next cooling
zone can be configured.
Air cooling circuit:
1
Page 51 of 60
2