Download Operating Instructions

Proline heating thermostats
7.8.6
Setting the volume of the acoustic signals
The LAUDA Proline Thermostats signal alarms as a dual-tone acoustic signal and warnings as a continuous
tone.
@schm
Master
− Call the volume setting
3x
@schm
(Ì 7.6.4).
to LMDls
to O@p@
@schm
7x
to
−
@K
VW
2
°C
1
°C
takes you to the alarm volume,
the currently set volume, here
− …
and 1x
2, is displayed or …
takes you to the warning tone volume.
− The currently set volume, here
1, is displayed.
− The volume display flashes.
− Select volume:
or
/
= off to
2 = loud.
− You hear the alarm or warning tones at the selected volume.
− Display flashes 4 s Æ new value is automatically accepted, or
Wait 4 seconds or
− value is immediately accepted with the Enter key.
Command
Sounds
− Open the device parameter menu via the
soft key
− With the cursor keys continue to:
Æ Settings Æ Basic settings Æ
Sounds .
loud
medium
low
off
Alarm
Menu .
− Select either Alarm or Warning .
− Example on left: Alarm is set to loud.
− Select the desired volume with
or
.
− Accept selection with
Pump
YACE0071 / 7/26/2011
Menu
End
Tset
Tfix
Starting up
quit the window with
changes.
or End or
without making
65