1
Download Operating Instructions
Transcript
Proline heating thermostats 7.8.10 Restoring the works setting of the external temperature-probe offset If the offset has been misadjusted unintentionally, the works setting can be restored with this function. cDE D Master 3x − Call the offset works setting for the internal temperature probe . cDE D to LMDls to B@K-2x Command intern Pt100 extern Pt100 − Continue as described in (Ì 7.8.8) for the internal temperature probe. 3x Default − Open the device parameter menu via the Calibration Default soft key Menu . − With the cursor keys continue to: Æ Settings Æ Calibration Æ extern Pt100 Æ Default . − The adjacent window appears. − Confirm selection with . − Continue as described in (Ì 7.8.8) for the internal temperature probe. Pump YACE0071 / 7/26/2011 Menu End Tset Tfix Starting up 69
