Download Operating Instructions - WAGNER®

closing direction
close during return
Fixed closing cam
sleeve
Opening and closing of MSD-R in stationary application, especially on multi-spindle-automatics.
The turning head is closed and opened through axial movement of
the closing ring by means of a control ring (see fig. 9b). The axial
movement is limited by stops. For closing the stops are mounted
on the guide bead of the axial slide of the machine. The opening
stops can be mounted as above or on the cross slide.
Fig. 9a: MSD closing by means of sleeve return.
Stops for opening
control ring
collar set
shank
tool holder
stops flapped to the top for 30°
stops for
closing
axial tool slide
Fig. 9b: Opening and closing of MSD 20-R in stationary application.
Multi-Cutter Turning Heads
10