Download Bullet Tools 520 Instructions / Assembly

520 Set up
Welcome! Your MAGNUM RCT SHEAR Comes ready to assemble.*
*You will need #2 & #3 Phillips head screwdrivers
and a 1/2” (13mm) socket or wrench.
Please Review and Verify Parts Included in Box:
1. Power Assembly
1a. Safety Lock pin
2. Handle Assembly
3. Table
4. Tail
5. Rails (2)
6. Angle Guide
7. Hone Stone
8. Hardware Kit
F.
1a.
2.
6.
D.
1.
4.
H.
E.
A.
C.
3.
7.
Hardware kit:
Item A. Item B. Item C. Item D.
Item E. Item F.
Item G.
5.
B.
(4) 6mm x 60mm PH Phillips Machine Screws
(4) M6 Star Washers
(4) 6mm x 25mm PH Phillips Machine Screws
(5) M6 x 16mm FH Phillips Machine Screws
(4) #10 x 1 FH Phillips Self Tapping Screws
(2) M8 x 50mm Hex Bolts
(1) M6 Thumbscrew
A.
B.
C.
F.
G.
D.
E.
Assembly
1. Attach Rails
2. Attach Tail
Attach rails to Power Assembly base using Item A
machine screws, fitted with Item B star washers.
Attach tail to rails using Item C machine screws.
Make sure holes in tail are facing up.
2
1
2