Transcript
Assembly Instructions • Hanging Fixture A This lamp uses nine (9) 60-watt maximum Type A bulbs (Not included). Cleaning Instructions Do not use polish or cleaners. Wipe clean with a soft cloth. 1. 2. 3. 4. 5. 6. Thread the Loop ( A) to the nipple of the Tube(B) until tighten. Attach the Cap(C) to the Nipple (D) then secure by Tube (B). Place Glasses(F) over Sockets (G) and secure by Socket Rings (E). Thread the Nipple ( I ) on Finial (J) to the Bottom Coupler (H) until tighten. Install the light bulb (not provided) in accordance with the fixture specification. Restore electricity and check the operation of your new light fixture. 33164 Typical Assembly Time: 15 minutes
