Download Star Micronics TSP2000 User's Manual

Appendix A: Specifications
(1) Printing method
Direct line thermal printing
(2) Print speed
Max. 75 mm/s
(3) Dot density
203 dpi: 8 dots/mm (0.125 mm/dot)
(4) Number of print columns
48 (12 × 24 dots)
64 (9 × 24 dots): ESC/POS mode only
(5) Roll paper
Refer to chapter 3 for details on the recommended
paper.
Paper width: 80- 01.0 mm
Roll diameter: ø90 mm or less
External diameter of core: ø18 +0.5
0 mm
Internal diameter of core: ø12 ± 0.5 mm
(6) Bar codes
UPC-A, UPC-E, JAN 13 (EAN), JAN 8 (EAN),
CODE 39, CODE 93, CODE 128, ITF, CODA BAR
(7) Sensor
Paper end, cover open, paper near end, abnormal
print head temperature
(8) Overall dimension
144 (W) × 195 (D) × 138 (W) (mm)
(9) Weight
Approx. 1.48 kg
Print Area
Cutter position
1 to 2
72±0.2 4±1
Print area
80 -10
Paper width
19.6±1
4±1
576
*1
Paper feed direction
1
Print head
printing position
0.125
0.125
576 dots
Print area 72±0.2
Unit : mm
Note *1 Since the firmware automatically feeds the paper 5 mm after it is cut,
the top cutter margin becomes 24.6±1.
– 87 –
APPENDIX
A-1. General Specifications