Download Sony PCG-VX89P User's Manual

PCG-VX89/VX89K/VX89P
SERVICE MANUAL
For American Area
US Model
Canadian Model
Ver 1-2002J
Revision History
Lineup : PCG-VX89P
PCG-VX89K
PCG-VX89
Illust : PCG-VX89P
l
a
i
t
S400
n
e
d
i
f
n
o
C
• Design and specifications are subject to
change without notice.
NOTEBOOK COMPUTER
9-876-021-01
Information in this document is subject to change without notice.
Caution Markings for Lithium/Ion Battery - The following or similar
texts shall be provided on battery pack of equipment or in both the
Sony, VAIO and CLIE are trademarks or registered trademarks of
Sony. Microsoft, Windows, Windows Media, Outlook, Bookshelf
operating and the service instructions.
and other Microsoft products are trademarks or registered trademarks
of Microsoft Corporation in the United States and other countries.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by
The word Bluetooth and the Bluetooth logo are trademarks of
Bluetooth SIG, Inc. AMD, AMD logo, AMD Duron and
the manufacturer. Discard used batteries according to the
manufacturer’s instructions.
combinations thereof, 3DNow!, are trademarks of Advanced Micro
Devices, Inc. Intel Inside logo, Pentium and Celeron are trademarks
CAUTION: The battery pack used in this device may present a fire
or registered trademarks of Intel Corporation. Transmeta, the
Transmeta logo, Crusoe Processor, the Crusoe logo and
or chemical burn hazard if mistreated. Do not disassemble, heat
above 100°C (212°F) or incinerate.
combinations thereof are trademarks of Transmeta Corporation in
the USA and other countries. Graffiti, HotSync, PalmModem, and
Dispose of used battery promptly.
Keep away from children.
Palm OS are resistered trademarks, and the Hotsync logo and Palm
are trademarks of Palm, Inc. or its subsidiaries. (M) and Motrola
CAUTION: Changing the back up battery.
are trademarks of Motrora, Inc. Other Motrola products and services
with (R) mark like Dragomball are the trademarks of Motrola, Inc.
• Overcharging, short circuiting, reverse charging, multilation or
incineration of the cells must be avoided to prevent one or more of
All other names of systems, products and services in this manual
the following occurrences; release of toxic materials, release of
hydrogen and/or oxygen gas, rise in surface temperature.
are trademarks or registered trademarks of their respective owners.
In this manual, the (TM) or (R) mark are not specified.
• If a cell has leaked or vented, it should be replaced immediately
while avoiding to touch it without any protection.
Service and Inspection Precautions
1. Obey precautionary markings and instructions
4. Inspect after completing service
Labels and stamps on the cabinet, chassis, and components identify areas
requiring special precautions. Be sure to observe these precautions, as well
as all precautions listed in the operating manual and other associated
documents.
After servicing, inspect to make sure that all screws, components, and wiring
have been returned to their original condition. Also check the area around
the repair location to ensure that repair work has caused no damage, and
confirm safety.
2. Use designated parts only
5. When replacing chip components...
The set’s components possess important safety characteristics, such as
noncombustibility and the ability to tolerate large voltages. Be sure that
replacement parts possess the same safety characteristics as the originals.
Also remember that the 0 mark, which appears in circuit diagrams and
parts lists, denotes components that have particularly important safety
functions; be extra sure to use only the designated components.
Never reuse components. Also remember that the negative side of tantalum
capacitors is easily damaged by heat.
3. Always follow the original design when mounting
parts and routing wires
6. When handling flexible print boards...
• The temperature of the soldering-iron tip should be about 270C.
• Do not apply the tip more than three times to the same pattern.
• Handle patterns with care; never apply force.
The original layout includes various safety features, such as inclusion of
insulating materials (tubes and tape) and the mounting of parts above the
printer board. In addition, internal wiring has been routed and clamped so
as to keep it away from hot or high-voltage parts. When mounting parts or
routing wires, therefore, be sure to duplicate the original layout.
Caution: Remember that hard disk drives are easily damaged by
vibration. Always handle with care.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
Confidential
—2—
PCG-VX89/VX89K/VX89P (AM)
TABLE OF CONTENTS
Section
Title
Page
CHAPTER 1. BLOCK DIAGRAM ............................... 1-1
(to 1-2)
CHAPTER 2. FRAME HARNESS DIAGRAM ........ 2-1
(to 2-2)
CHAPTER 3. EXPLODED VIEWS AND
PARTS LIST ............................................ 3-1
3-1. Main Section .................................................................... 3-2
3-2. LCD Section – Made by HI – .......................................... 3-5
(to 3-6)
History of the changes is shown as the
“Revision History” at the end of this data.
Confidential
—3—
PCG-VX89/VX89K/VX89P (AM)
CHAPTER 1.
BLOCK DIAGRAM
SON Y
1
14.1XGA
LCD &
Inverter
Intel PentiumIII -m
900MHz
LV
30p
IFX-209( Left)
VCH
DV0
CN
15P
CN
15P
VGA CN
CN15P
CNX -176
CN 4P
Intel 82815EM-T
GMCH2-m
RJ-45
Memory Bus PC=100
Intel
DA82562ET
Ant L
(Sub)
W-LAN
MiniPCI
Module
Type III
Intel /
FW82807A
A
Ant R
(Main)
256MB Tech
IFX-208(Right)
256MB DIMM
PCI Bus
USB CN
CN4P
USB 1.1
W-LAN SW
CN 17P
i.LINK
USB 1.1
CN 17P
CNX -173
CN 50P
HDD
FWH
SST
49LF004A
Amp
CN
2P
JogDial
Encoder
KBC/EC
HITACH
H8/2149
CN 30P
STmicro
M29W200BB70N6
CN 30P
CN 2P
HeadPhone
1
CN
1-1
CN 14P
CN 14P
MIC CN
USB 1.1
Memoryst ick
Controller
IFX -207
CN24P
CN
3P
ATF
AD1030A
CN
2P
FLT-7
CN6P
CN6P
CN 30P
Memorystic k
Slot
CNX-174
USB 1.1
I/O
Expander
O2MICRO
OZ998S
USB 1.1
CN 30P
USB C N
CN4P
PC Card Connector FAN
1 Slot
LPC Bus
AudioCodec
(AC '97)
CN 2P
RJ11
MBX-56
AC Link
CN 30P
Conexant
Smart MC2
CN 30P
MODEM
Intel 82801BAM
ICH2-m
CN 100P
PCI
Ultra ATA66/100
CardBus/16bitCard
Card con troller
RICOHR5C475II
Clock Generator
IMI/C9835AT
CN 100P
i.Link
TSB43AB
22
CN
2P
CN
2P
DC out
Mini PCI
Connector
TypeIII
CN
2P
CN
12P
CN 7P
Back
Botton
SP(L)
TouchPad
JOG
CN
2P
CN
8P
SP(R)
CN
8P
SWX-101
Battery
11.1V/3600mAh
KeyBoard
Power SW
SWX-103
Confidential
1-2
(END)
PCG-VX89/VX89K/VX89P (AM)
CHAPTER 2.
FRAME HARNESS DIAGRAM
IFX-209 Board IFX-208 Board
(Side-A)
(Side-A)
CN8200
LCD
CN8100
LCD Block
R Side
INVERTER
LCD HARNESS
L Side
DC IN
BATTERY PACK
HARNESS, (WITH DC JACK)
NETWORK
MBX-56 Board
(Side-A)
HARNESS, RJ-45
6
1
DISPLAY
30
1
29
KEY BOARD
1
2
4
CN2501
CN2502
CN2600 1
CN1700
CN5001
15
2
1
2
1
20
2
19
1
FLT-7 Board
(Side-A)
CN1001
15
CN1301
DC FAN
CN1000
CNX-176 Board
(Side-A)
2
1
1
1
143
CN800
99
1
100
23
2
CN4000
1
CN1901
CN1410
123
CN2100
IEEE 1394 i.LINK
CN6500
2
CN1800
30
1
2
29
CNX-174 Board
(Side-A)
1
CN1500
1
124
SWX-103 Board
(Side-A)
1
2
1
CN4001
CN1400
CN2
2
1
24
30
2
1
CN1
CN300
144
2
CN2000
HARD DISK
DC OUT
EXTERNAL MIC IN
CN4502
CN4002
50 49
29 30
17
1
USB
CN2500
2
CN4003
1
14
CN4503
CN4501
CN2602
1
2
HEADPHONE
CN4699
1
USB
30
CN4601
CNX-173 Board
(Side-A)
PC CARD
CN4500
NICKEL HYDROGEN
BATTERY
PHONE
CN4600
CN5500
PC CARD
CONNCTOR
14
1
CN6005
2
30
1
CN6002
SPEAKER
LEFT
29
CN6001
J1
1
CN6004
1
30 1
12 1
8
7
CN6003
1
2
IFX-207 Board
(Side-A)
CN6000
SPEAKER
RIGHT
CON2
SWX-101 Board
(Side-A)
CARD, MODEM
Front Face
MEMORY STICK
12
1
J1
PAD, TOUCH
CARD, WIRELESS LAN
DIAL UNIT, JOG
From board to connector (direct connection)
Harness (connector at both end)
Harness (soldered at one end)
Connectors soldered on board and appearing on the panel
Confidential
2-1
2-2
(END)
PCG-VX89/VX89K/VX89P (AM)
CHAPTER 3.
EXPLODED VIEWS AND PARTS LIST
NOTE:
• Items marked “ * ” are not stocked since they are seldom
required for routine service. Some delay should be
anticipated when ordering these items.
• The mechanical parts with no reference number in the
exploded views are not supplied.
• When two or more parts are shown in parallel, use the
part described first as the main part.
• The parts marked “ $ ” are the High Value Modules.
• The parts marked “ # ” are the parts on which
barcode label is attached.
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
Confidential
3-1
PCG-VX89/VX89K/VX89P (AM)
3-1. Main Section
Ref.No.
1
2
3
4
4
Part No.
1-477-283-21 $ #
4-662-400-02
1-796-319-11
4-666-738-21
4-666-738-31
Description
KEYBOARD UNIT (US)
COVER (TP)
PAD, TOUCH
(VX89P)...LABEL (ID)
(VX89)...LABEL (ID)
Ref.No.
63
64
* 65
66
67
Part No.
4-662-573-02
4-662-574-02
4-662-570-02
1-761-380-23
1-685-170-11
4
5
6
7
8
4-666-738-41
4-663-835-01
4-657-945-01
4-662-405-02
X-4624-713-6
(VX89K)...LABEL (ID)
TAPE (TP)
PLATE (TP)
ESCUTCHEON (JOG)
HOUSING (PARM REST) ASSY
* 68
69
70
71
* 72
4-662-665-02
1-684-994-11
1-816-580-11
4-643-832-41
4-662-664-02
PLATE (PCC)
FPC (PC CARD, WITH CONNECTOR)
CONNECTOR, PC CARD (EJECTOR)
DUMMY CARD
PROTECTOR (PCC)
9
10
11
12
13
4-662-787-01
A-8067-219-A
4-662-421-02
1-825-150-21
4-658-789-02
CUSHION (CENTER BZ)
COMPLETE PWB SWX-103
CASE (CAPS)
SPEAKER, (2.0CM)
TAPE (HARNESS)
73
74
75
77
78
4-663-422-01
4-663-421-02
1-761-495-11
4-664-890-02
4-664-957-01
SHEET (FPC MDC)
SHEET (MPCI)
CARD, WIRELESS LAN
CUSHION HEATSINK
SHEET KEYBOARD
14
15
16
17
18
4-663-133-01
1-824-088-11
1-824-085-11
1-824-089-11
X-4624-886-2
HOLDER (SP) (R)
CABLE,FLEXIBLE FLAT (SWX1-SWX2
CABLE, FLEXIBLE FLAT(MBX-SWX1)
CABLE, FLEXIBLE FLAT (SWX1-TP)
PARM ASSY, LATCH
81
82
83
84
85
4-665-008-01
4-665-009-01
4-664-909-01
4-663-932-01
4-664-221-01
SHEET (SP)
TAPE (MPCI)
SHEET (BRACKET R)
SHEET (DC), INSULATING
SHEET (MBX), INSULATING
21
22
23
24
25
4-662-407-01
1-476-945-11
A-8067-218-A $
4-663-132-01
1-825-150-11
WINDOW (MS)
ENCODER, JOG
COMPLETE PWB SWX-101
HOLDER (SP) (L)
SPEAKER, (2.0CM)
86
87
88
89
90
4-664-224-01
4-660-499-11
4-657-991-01
4-664-253-02
4-664-254-02
SHEET (FFC 30)
CUSHION DOOR
SHEET (JOG), INSULATING
PLATE (WL)
SHEET (HDD), CONDUCTIVE
* 26
* 28
29
30
* 31
4-662-918-01
1-763-838-11
A-8112-160-A $ #
1-468-624-21
4-662-925-01
PROTECTER HEATSINK
DC FAN (WITH HEATSINK)
C/P (MBX-56) (P900) (S)
BATTERY, VANADIUM-LITHIUM
DC, HOLDER
91
92
97
98
99
4-664-581-01
X-4624-953-2
4-665-091-01
4-665-092-01
4-665-317-01
SHEET (PC CARD)
PLATE (MINI-PCI) ASSY
PLATE (KEYBOARD)
CUSHION (PKB)
CUSHION MZ
32
33
34
* 35
36
1-961-483-21
1-960-827-71
A-8067-207-A $
4-662-571-01
X-4624-779-2
HARNESS (WITH DC JACK)
HARNESS (2 PIN)
COMPLETE PWB CNX-174
BRACKET (IO R)
ASSY DOOR R
100
101
104
105
106
4-665-096-01
4-664-828-01
A-8067-505-A $
1-961-895-11
4-666-382-01
TAPE (COVER TP)
ADHESIVE TAPE (BOTTOM)
COMPLETE PWB FLT-7
HARNESS
ADHESIVE (TAPE) (FLT-7)
37
38
39
40
41
1-824-086-11
4-663-369-02
4-662-877-02
1-824-087-11
A-8067-544-A $
CABLE, FLEXIBLE FLAT (MBX-CNX)
COVER (R), FOOT
RUBBER (REAR), FOOT
CABLE, FLEXIBLE FLAT (CNX-IFX)
COMPLETE PWB IFX-207
B1
B2
B3
B4
B5
4-664-453-01
4-664-453-11
4-641-726-21
4-635-966-01
4-635-301-01
SCREW
SCREW
SCREW
SCREW
SCREW
42
43
44
46
47
4-662-878-02
X-4624-811-2
4-659-832-01
4-635-956-01
4-663-370-02
RUBBER (FRONT), FOOT
HOUSING (BOTTOM) ASSY
SHEET,THERMAL
SPRING (B), COMPRESSION COIL
COVER (L), FOOT
4-663-438-02
X-4624-888-2
4-662-388-02
4-664-157-01
A-8059-344-A $ #
SHEET
DOOR (HDD) ASSY
BRACKET (HDD)
SHEET (HDD)
ASSY HDD 30GB (T,20,F)(S)
53
54
55
56
57
1-685-027-11
1-684-993-11
X-4624-780-4
A-8067-204-A $
1-961-763-11
PWB, FLEXIBLE PRINT (HDD)
FPC (VGA)
ASSY DOOR V
COMPLETE PWB CNX-176
HARNESS, RJ-45
* 58
59
60
61
62
4-662-572-01
1-791-608-21
A-8067-205-A $
X-4624-781-4
1-684-986-11
BRACKET (IO V)
CONNECTOR, HARNESS WITH (DC)
COMPLETE PWB CNX-173
ASSY DOOR L
FPC (I. LINK)
48
49
* 50
51
52
#
Description
SPACER (WL)
SWITCH (WL)
BRACKET (IO L)
CARD, MODEM
FPC (MDC)
(M2X4), SPECIAL HEAD
(M2X5.5), SPECIAL HEAD
(M2), SPECIAL HEAD
(HEX)
M3X4
Confidential
3-2
PCG-VX89/VX89K/VX89P (AM)
B1
92
B1
13
1
91
78
B1
72
B3
13
75
F
2
71
B1
74
26
82
73
L
M
70
B1
77
99
99
28
I
H
B1
B1
E
89
65
88
64
98
100
7
B2
B3
K
67
B1
B3
58
J
8
9
Supplied
with 29
Supplied with 8
30
B1
59
Supplied
with 28
44
68
63
62
4
6
J
69
57
G
29
B4
B3
60
K
E
3
56
F
H
54
B
105
104
66
47
61
85
D
106
5
39
B
48
I
53
31
B3
13
25
10
L
21
55
90
9
B3
97
32
C
81
D
46
52
Supplied
with 43
101
84
M
24
37
B3
51
11
18
B1
17
23
13
12
B3
34
G
B1
16
13
33
B3
C
13
22
81
B5
B1
35
86
15
42
43
50
83
B5
13
B1
B1
14
B1
A
B3
36
38
B3
A
13
49
40
42
39
87
Supplied
with 49
41
B3
B1
Confidential
3-3
3-4
PCG-VX89/VX89K/VX89P (AM)
3-2. LCD Section – Made by HI –
206
202
201
B2
Supplied
with 202
203
B2
204
B6
B3
B6
207
208
Ref.No.
201
202
203
204
206
Part No.
4-662-789-01
X-4624-714-2
4-662-788-01
4-662-787-01
4-659-342-01
Description
COVER (LCD), SCREW
HOUSING (BEZEL) ASSY
CUSHION, LATCH
CUSHION (CENTER BZ)
BLIND (LCD), SCREW
* 207
208
* 209
210
211
4-662-427-01
A-8067-411-A $ #
4-662-434-01
1-961-709-11
4-658-789-02
BRACKET (LCD L)
LCD(14HI)ASSY (S)
BRACKET (LCD R)
HARNESS, LCD
TAPE (HARNESS)
212
213
214
215
217
A-8067-221-A
1-823-844-21
X-4624-887-1
4-639-623-01
A-8067-220-A
COMPLETE PWB IFX-209
CABLE,COAXIAL (BLACK) (L670)
DISPLAY ASSY, LATCH
SPRING (LATCH), COIL
COMPLETE PWB IFX-208
218
219
220
221
222
1-823-844-31
X-4624-812-2
X-4624-716-2
4-662-383-02
X-4624-717-2
CABLE,COAXIAL (GRAY) (L930)
HOUSING (DISPLAY) ASSY
HINGE (RIGHT) ASSY
COVER (HINGE) (R)
HINGE (LEFT) ASSY
223
224
227
4-662-382-02
1-476-735-11
X-4625-019-1
COVER (HINGE) (L)
INVERTER UNIT
ESCUTCHEON (WL) ASSY
B1
B2
B3
B6
4-664-453-01
4-664-453-11
4-641-726-21
4-641-726-71
SCREW
SCREW
SCREW
SCREW
Ref.No. Part No.
Description
ACCESSORIES
************
0801
0802
804
805
806
1-476-943-21 $
1-757-562-31
1-823-439-11
4-657-363-01
X-4625-087-1
ADAPTOR, AC
CORD, POWER
CORD, ILINK CONNECTION
CLAMP
STAND ASSY
A-8110-748-A
4-668-323-01
BP2S/HI (U) ASSY (S)
(VX89K)...
SPECIFICATION SHEET, 2370UAZ
QUICK START, 2370UA
807
4-667-818-01
LOOK AT EXPLODED VIEWS OF THE PART
**********************************
808
(M2X4), SPECIAL HEAD
(M2X4), SPECIAL HEAD
(M2), SPECIAL HEAD
(M2), SPECIAL HEAD
PCGA-CRWD2
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
B6
209
A
B3
801
805
808
AC Adaptor (1)
Clamp (1)
CD-RW/DVD-ROM Drive
(PCGA-CRWD2)
802
806
Power Cord (1)
Stand (1)
B6
210
211
B3
212
218
214
B3
B
B1
Supplied
with 214
• The CD-RW/DVD-ROM Drive itself does not have the Part No.
Refer to the PCGA-CRWD2 Service manual (9-874-566-01).
Because only the 804 iLINK Connection Cord is reguired for
connection with a computor, the follwing parts are not supplied
with the CD-RW/DVD-ROM drive.
215
1-476-940-22 ADAPTOR, AC
1-757-562-31 CORD, POWER
1-790-763-21 CORD, CONNECTION
4-663-161-11 MANUAL, INSTRUCTION
4-663-751-11 MANUAL, INSTRUCTION (FIRST)
B1
B3
B3
223
227
222
B1
804
807
i LINK Connection Cord (1)
Battery Pack (1)
217
220
213
B3
B
224
221
219
A
Confidential
3-5
3-6
(END)
PCG-VX89/VX89K/VX89P (AM)
PCG-VX89/VX89K/VX89P (AM)
List of PCG-VX Series (As of October, 2002)
Model Name
Service Manual
Part No.
PCG-VX88
PCG-VX88P
9-874-532-01
PCG-VX89
PCG-VX89K
PCG-VX89P
9-876-021-01
: Additional Models
This manual and the constituent data may not be
replicated, copied nor reprinted in whole or in part
without prior written authorization of Sony Corporation.
9-876-021-01
Sony Corporation
— 20 —
English
2002J1600-1
© 2002 Sony Corporation
Published by Sony EMCS VAIO-GSC [SNT]
Revision History
Suffix
Ver.
Date
-01
Ver. 1
2002.10.04
Contents
QM No.
First
Edition
< Remarks >
[Confidential]
PCG-VX89/VX89K/VX89P (AM)