Download Ricoh Facsimile Reference Basic User's Manual

Control Panel
Reading the Display
The display shows you the machine status, messages, and guides you through
operations.
1
Note
ˆ This machine automatically returns to standby mode if you do not use the
machine for a certain period of time. You can select the period using "Facsimile Auto Reset Timer". See “Timer Settings”, General Settings Guide.
Reading the display and using keys
Display contents will differ depending on installed optional units.
Note
ˆ The copy display is set as the default display when the machine is turned on.
You can change the settings in the System Settings. See General Settings Guide.
ABZ102S.eps
4
1
2
3
1. Selection keys
3. {OK} key
Correspond to items at the bottom line on
the display.
Example: The standby display
• When the instruction "Press [
]"
appears in this manual, press the left
selection key.
• When the instruction "Press [Tone]"
appears in this manual, press the middle selection key.
• When the instruction "Press [TX Mode]"
appears in this manual, press the right
selection key.
Press to set a selected item or entered numeric values.
4. Scroll keys
Press to move the cursor to each direction
on by one.
When {U}, {T}, {V} or {W} appears in
this manual, press the scroll key of the
same direction.
2. {Cancel} key
Press to cancel an operation or return to
the previous display.
7