Download Quantum PX506 Installation Instructions
Transcript
Quantum PX506 and PX510 Unpacking and Installation Instructions Document 81-81338-01 D01 June 2005 4 Secure the back of the library to the rack with two mounting clamps and and two Allen screws on each clamp. The mounting clamps are oriented differently depending on the depth of the rack (see figure 20). Note: If the rack depth is 27 to 30 in., the long portion of the clamp is mounted to the back. If the rack depth is 30 to 36 in., the long portion is mounted to the front. 5 Secure the mounting clamps to the rack rails with two PHILLIPS screws on each side (see figure 20). Figure 20 Securing the Back of the Library Allen screws Ba c k of ra ck Long portion PHILLIPS screws PX506 shown 6 Install the power supplies previously removed. Tighten the captive screws with a flat blade screw driver. 7 To install the tape drives into the library: a Remove the tape drive cover plates by loosening the captive screws securing the plate to the library chassis with a flat blade screwdriver (see figure 21). Installing the Library 27