Download Pelco DVR C682M-E User's Manual

DX7000 SYSTEM SETUP
To setup the DX7000 Digital Video Recorder use the left mouse button and click on the
SETUP button located in the DISPLAY mode.
CAMERA SETUP
1
2
3
4
01177
Figure 6. Channel Setup Menu
1
CAMERA NAME Box
2
SIGNAL TYPE – Selection must correspond with the NTSC/PAL selection switch
setting. Refer to Figure 1, item 7 .
3
CAMERA ENABLE Button
4
CAMERA SELECTION Button
Use the following steps to set up a camera site.
10
1.
Click the CAMERA ENABLE button to enable a camera for setup.
2.
Click the CAMERA SELECTION button (located above the CAMERA ENABLE button);
the camera scene appears in the Camera Viewing Window.
3.
Enter the location of the camera in the CAMERA NAME box.
Pelco Manual C682M-E (11/01)