Transcript
d4338_qsg_e_7.fm Page 1 Wednesday, August 23, 2006 2:44 PM BEFORE YOU BEGIN For more information, please refer to the Basic & Advanced Manuals or visit: www.olympusamerica.com/support Charge the battery (recommended*) 3 Gather these items (box contents) Start Here Quick Start Guide VH782601 LI-42B Lithium Ion Battery Power Cable Digital Camera Strap 1 LI-42B Lithium Ion Battery LI-40C Battery Charger AC Wall Outlet 2 Charging Indicator LI-40C Battery Charger USB Cable Red light on: Charging Light off: Charging complete (Charging time: Approx. 300 minutes) OLYMPUS Master Software CD-ROM AV Cable *Battery comes partially charged. Items not shown: Advanced Manual (CD-ROM), Basic Manual, warranty card. Contents may vary depending on purchase location. GET STARTED c. Set the date and time b. Insert the battery 1 Press o button to turn the camera on. 2 Press 1 or 2 to set [Y] and then press 3 to 1 Slide 2 Lift a. Attach the strap o Button go to the next step. 3 Repeat the operations above to set [M], [D], 123 Button [TIME] and the date formats. o Button 4 Press o. Strap X Y 1 Battery lock knob ----.--.-- --:-- Y/M/D Date formats (Y-M-D, M-D-Y, D-M-Y) 3 Insert Pull the strap tight so that it does not come loose. CANCEL TAKE A PICTURE b. Focus 1 Press the shutter mark over your subject. CAMERA DIAGRAM Shutter Button o Button Multi-Connector Self-Timer Lamp Flash Strap Eyelet button completely to take the picture. Green Lamp a. Zoom MENU c. Take the picture 1 Using the monitor, place the AF target Zoom Out: M D TIME (Pressed Completely) Zoom In: (Pressed Halfway) 4 HQ 3072×2304 Shutter Button Shutter Button Pictures are recorded in the internal memory. Pictures can also be recorded to an optional xD-Picture Card (It is called just “card” in the attached instruction manual.) AF Target Mark 2 Press and hold the shutter button halfway to lock the focus. 4 HQ 3072×2304 The green lamp indicates the focus is locked. 4 HQ 3072×2304 Connector Cover Monitor REVIEW OR ERASE A PICTURE Lens Microphone Zoom Button K/h/s Button c. To erase a picture Speaker q Button Arrow Pad (1243) a.Select the playback mode 1 Press the q button. Press T or W to zoom in or out. Press o to return to the original size. The last picture taken will be displayed. Zoom Button Press 12 or 43 to scroll around. q Button Next Picture TRANSFER IMAGES /< Button m Button (MENU) NO BACK SET OK MENU 2Y/S Button want to erase. Prev. Picture o Button (OK/FUNC) YES 1 Display the picture you Press the K/h/s button to return to the shooting mode. [IN] ERASE b. Take a closer look 2 Press the 2Y/S button. Select the single-frame playback. A single image cannot be erased while the close-up playback/index playback is operated. 3 Select [YES], and press o. Tripod Socket b. Connect the camera to the computer c. Transfer images to the computer 1 Connect the camera and computer using the USB cable (included). 1 With the camera now connected, 1 Insert the OLYMPUS Master CD-ROM. 2 Windows: Click the “OLYMPUS Master“ button. Macintosh: Double-click the “Installer“ icon. The [Transfer Images] window is displayed. USB cable 2 Select the images you want to 2 transfer, and click the [Transfer Images] button. 1 2 Select [PC] on the monitor, and press o. USB [IN] PC 3 Simply follow the on-screen instructions. If the [Transfer Images] window is not displayed automatically: [Transfer Images] button a. Click the “Transfer Images” icon on the OLYMPUS Master main menu. b. Click the “From Camera” icon. EASY PRINT CUSTOM PRINT Remember to register your camera when you install OLYMPUS Master or visit: www.olympusamerica.com/prodreg Printed in China [Transfer Images] window open OLYMPUS Master. The monitor will turn on automatically. a. Install the software Battery Compartment/Card Cover The picture is permanently erased. EXIT Your PC will now recognize your camera as a removable storage drive. SET OK © 2006
