Download Nokia 7280 User Guide
Transcript
Phone security 4. Phone security Your phone is equipped with different security features that allow you to do the following: • Avoid making accidental calls • Prevent unauthorized use of your phone ■ Lock the keypad (keyguard) The keyguard disables your keypad to prevent accidental key presses. Select Menu or Unlock and the Call key within 1.5 seconds to lock or unlock the keypad. If the Security keyguard is set to On, select Unlock, and enter the security code. An incoming call can be operated normally. When you end or reject the call, the keypad will automatically be locked. Note: When the keyguard is on, calls may be possible to the emergency number programmed into your phone. ■ Access codes • Security code (5 to 10 digits): The security code helps to protect your phone against unauthorized use. The preset code is 12345. To change the code and set the phone to request it, see Security settings on page 56. • PIN code (4 to 8 digits): The PIN (personal identification number) code helps to protect the SIM card against unauthorized use. It may be supplied with the SIM card. If you activate the PIN code request function in the Security settings menu, the code is requested each time the phone is switched on. If you enter an incorrect PIN code three times in succession, the SIM card is blocked. You must enter the PUK code to unblock the SIM card and set a new PIN code • PIN2 code (4 to 8 digits): This code may be supplied with the SIM card and is required to access some functions, such as call counters. 20