Transcript
Specifications ADA DESCRIPTION • Metal construction with a chrome plated finish. • Includes shower arm, flange, non-metalic shower head and non-metallic diverter tub spout OPERATION • Handle operates counterclockwise through a 270° arc with off at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 3° FLOW • Showerhead is limited to 1.75 gpm at 80 psi CARTRIDGE • 1222 cartridge design • Accommodates back to back installations • Nonmetallic/nonferrous and stainless steel material STANDARDS • Third party certified to ASME A112.18.1/CSA B-125.1, ASSE 1016, ICC A117.1 and all applicable requirements referenced therein WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 3-1/2” (89mm) 2"CC (51mm) 1 7/8" IPS (48mm) MAX WALL FINISHED WALL LINE WATER-SAVING CHATEAU® POSI-TEMP® Single-Handle Tub/Shower Trim Kit Model: TL188 (Bulk Packed 12 per carton) FACE OF STUD 1/2" MIN. CC (13mm) 5/8" MIN. IPS (16mm) 7-13/16” (199mm) 3/16"(typ) (5mm) PLASTER GROUND 7" (178mm) ESC. DIAM. 2 1/2" MAX. (63mm) 4-1/2" (114mm) 1 1/2" MAX. (38mm) 6'-6" (1981mm) NOMINAL CL DIRECTION OF HANDLE ROTATION DIAMETER WALL OPENING 1 3/8" (35mm) 6"- 11" (152mm- 279mm) SHOWER 45" (1143mm)/ 48" (1219mm) CL 1 3/8" (35mm) 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN. PLASTIC TUB/SHOWER SURROUND 32" (813mm) TUB/SHOWER AND TUB ONLY FLOOR LINE FLOOR LINE THICK WALL APPLICATION THIN WALL APPLICATION CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 8/07 FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com