Transcript
Specifications FAUCET DESCRIPTION • Metal construction with various finishes identified by suffix OPERATION • • • Handle operates counterclockwise through a 270˚ arc with off at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction Adjustable temperature limit stop to control maximum hot water temperature Pressure balancing mechanism maintains selected discharge temperature to ± 2° CARTRIDGE • • • 1222 cartridge design Nonmetallic/nonferrous and stainless steel materials Accommodates back to back installations STANDARDS • Third party certified to ASME A112.18.1/CSA B-125.1, ICC A117.1 and all applicable requirements referenced therein • ADA KINGSLEY™ POSI-TEMP® Single-Handle Shower Valve Trim for lever handle WARRANTY • • Models: T2111 series Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser 5 year warranty if used in commercial installations 2" CC (51mm) 1 7/8" IPS (48mm) MAX WALL FACE OF STUD 1/2" MIN. CC (13mm) 5/8" MIN. IPS (16mm) FINISHED WALL LINE 3/16" (typ) (5mm) 7" (178mm) ESCUTCHEON DIAMETER 2 1/2" MAX. (63mm) 4-1/2" (114mm) WALL OPENING 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN. DIAMETER WALL OPENING 1 3/8" (35mm) HOT INLET 1 3/8" (35mm) 45" (1143mm)/ 48" (1219mm)-SHOWER COLD INLET 1 1/2" (38mm) CL CL 7-1/2" (191mm) MIN. PLASTER GROUND FLOOR PLASTIC TUB/SHOWER SURROUND FLOOR LINE THICK WALL APPLICATION THIN WALL APPLICATION CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 3/09 FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com