Transcript
Specif ications DESCRIPTION • Metal Construction with chrome plated finish • Pressure balancing cycle valve design with an adjustable temperature limit stop • 1/2" CC connections • Includes showerhead, arm, flange and diverter tub spout OPERATION • Lever style Handle • Handle operates counterclockwise through a 270° arc with off at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 3° FLOW • Showerhead is limited to 2.5 gpm (9.5 L/min) Max CARTRIDGE • 1222 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified to meet CSA B-125, ASME A112.18.1M, ANSI A117.1, ASSE 1016, and all applicable requirements referenced therein 7" (178mm) ESC. DIAM. 2" CC (51mm) 1 7/8" IPS (48mm) MAX WALL ADA CHATEAU® POSI-TEMP® Single-Handle Tub/Shower Valve Model: L2353 Model: L2363 (with 1/4 Turn Stops) WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations FACE OF STUD 1/2" MIN. CC (13mm) 5/8" MIN IPS (16mm) FINISHED WALL LINE 3/16"(typ) (5mm) PLASTER GROUND 2 1/2" MAX. (63mm) 4-1/2" (114mm) CL 6" Min -11" Max DIRECTION OF HANDLE ROTATION 1-1/2" (38mm) 6'-6" (1981mm) NOMINAL CL DIAMETER WALL OPENING 1 3/8" (35mm) SHOWER 45" (1143mm)/ 48" (1219mm) 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN. 1 3/8" (35mm) PLASTIC TUB/SHOWER SURROUND 32" (813mm) TUB/SHOWER AND TUB ONLY 4-1/2" (114mm) FLOOR LINE THICK WALL APPLICATION THIN WALL APPLICATION CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 9/05 FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
