Transcript
Specifications DESCRIPTION • Metal construction with a chrome plated, LifeShine® polished brass, LifeShine® brushed nickel, black opal™, classic gold, satine®, nickel or glacier finish • Includes adjustable showerhead arm and flange OPERATION • Handle operates counterclockwise through a 270˚ arc with off at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 2° FLOW • Showerhead is limited to 2.5 gpm (9.5 L/min) CARTRIDGE • 1222 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified by CSA to meet CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein and complies with the applicable requirements of ANSI A117.1 WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 2" CC (51mm) 1 7/8" IPS (48mm) MAX WALL ADA MONTICELLO® INSPIRATIONS™ POSI-TEMP® Single-Handle Tub/Shower (Trim Only) Models: T2347, T2347CP, T2347P, T2347W, (Bulk packed 12 per carton) *RT2347/AT2099, *RT2347P/AT2099P, *RT2347PM/AT2099PM, *RT2347BP/AT2099BP, *RT2347CG/AT2099CG, *RT2347ST/AT2099ST, *RT2347NL/AT2099NL (Packed 1 per carton) * Models Discontinued 2/1/05 T2449, T2449BN, T2449CP, T2449P, T2449PM, T2449PMC, T2449ST, T2449STP, T2449W (Packed 1 per carton) FACE OF STUD 1/2" MIN. CC (13mm) 5/8" MIN. IPS (16mm) FINISHED WALL LINE 3/16" (typ) (5mm) 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN. 7" (178mm) ESCUTCHEON DIAMETER 2 1/2" MAX. (63mm) 4-1/2" (114mm) WALL OPENING CL 1 3/8" (35mm) 1 3/8" (35mm) 45" (1143mm)/ 48" (1219mm)-SHOWER 32" (813mm)-TUB OR TUB SHOWER COLD INLET TUB RIM 1 1/2" (38mm) 6'-6" (1981mm) CL 7-1/2" (191mm) MIN. HOT INLET DIAMETER WALL OPENING PLASTER GROUND FLOOR PLASTIC TUB/SHOWER SURROUND FLOOR LINE THIN WALL APPLICATION THICK WALL APPLICATION CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 5/05 FOR MORE INFORMATION: 1-800-BUY-MOEN www.moen.com
