Transcript
Specifications ® DESCRIPTION • Metal construction with a chrome plated, decorative glacier or LifeShine® polished brass finish • Pressure balancing valve design with integral check stops, 1/2" CC connections OPERATION • Lever style handle with temperature indicator on the escutcheon, pull-on/push-off operation • Temperature operates through an 180° arc of handle travel (full cold to full hot) • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 2° CARTRIDGE • 1225 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified by CSA to meet CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein and complies with the applicable requirements of ANSI A117.1 WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations ADA MONTICELLO® MOENTROL® Single-Handle Tub/Shower Trim Only Models: T3133, T3133P, T3133W (Bulk Packed 12 per carton) T3132, T3132P, T3132W (Packed 1 per carton) NOTE: See reverse side for illustrated parts and optional handle inserts FINISHED WALL LINE 1-15/16"(49mm) MIN. 2-9/16" (65mm) MAX. 7" (178mm) ESCUTCHEON DIAMETER ESCUTCHEON 1" (25mm) 1-1/4" (32mm) 5-1/2" (140mm) WALL OPENING HOT INLET 7-1/2" (191mm) MIN. CL 6'-6" (1981mm) COLD INLET LEVER HANDLE (Handle inserts not furnished) 45" (1143mm)/ 48" (1219mm)- SHOWER 32" (813MM) - TUB OR TUB SHOWER TUB RIM FLOOR CRITICAL DIMENSIONS (DO NOT SCALE) MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158 ADA symbol applies to shower valve control only. Rev. 1/00