Transcript
Specifications FAUCET DESCRIPTION • Metal construction with chrome plated or LifeShine® brushed nickel finish OPERATION • Handle operates counterclockwise through a 270˚ arc with off at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 3° CARTRIDGE • 1222 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified to meet ASME A112.18.1/CSA B-125.1, ICC A117.1 and all applicable requirements referenced therein WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 2" CC (51mm) 1 7/8" IPS (48mm) MAX WALL ADA LEVEL™ POSI-TEMP® Single-Handle Shower (Valve Trim Only) Models: T2701, T2701BN FACE OF STUD 1/2" MIN. CC (13mm) 5/8" MIN. IPS (16mm) FINISHED WALL LINE 3/16" (typ) (5mm) 2-1/2" MAX. (63mm) 7" (178mm) ESCUTCHEON DIAMETER 4-1/2" (114mm) WALL OPENING 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN. DIAMETER WALL OPENING CL 1-3/8" (35mm) 1-3/8" (35mm) 45" (1143mm)/ 48" (1219mm)-SHOWER COLD INLET TUB RIM 1-1/2" (38mm) CL 7-1/2" (191mm) MIN HOT INLET PLASTER GROUND FLOOR PLASTIC TUB/SHOWER SURROUND FLOOR LINE THIN WALL APPLICATION THICK WALL APPLICATION CRITICAL DIMENSIONS (DO NOT SCALE) FOR MORE INFORMATION CALL: 1-800-465-6130 www.moen.com