Download Moen L2383 User's Manual

Transcript
Specifications
DESCRIPTION
• Metal construction with chrome plating, chrome with
ADA
LifeShine® polished brass accents, LifeShine® polished brass,
LifeShine® Satine, platinum or glacier finish
• Pressure balancing cycle valve design with an
adjustable temperature limit stop
• 1/2" IPS connections
• Includes showerhead, arm, flange, and diverter tub spout
OPERATION
• Lever style handle
• Handle operates counterclockwise through a 270˚ arc
with off at 6 o'clock and maximum hot at the 9 o'clock
position. Shut off in clockwise direction
• Adjustable temperature limit stop to control maximum
hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2˚
FLOW
Villeta™ Posi-Temp®
• Showerhead is limited to 2.5 gpm (9.5 L/min)
Single-Handle Tub/Shower
CARTRIDGE
• 1222 cartridge design
Model: L2383, L82383, L2383CP,
• Nonmetallic/nonferrous and stainless steel materials
L82383P,
L82383PM, L82383W, L82383ST
• Accommodates back to back installations
STANDARDS
• Third party certified by CSA to meet CSA B-125,
NOTE: See reverse side
ASME A112.18.1M and all applicable requirements
for illustrated parts
referenced therein and complies with the applicable
requirements of ANSI A117.1
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
FACE OF STUD
1/2" MIN. CC (13mm)
5/8" MIN IPS (16mm)
FINISHED WALL LINE
3/16"(typ) (5mm)
PLASTER GROUND
7" (178mm)
ESC. DIAM.
1-1/2"
(38mm)
2-1/2" MAX.
(63mm)
4-1/2"
(114mm)
CL
DIRECTION
OF HANDLE
ROTATION
6’-6"
(1981mm)
NOMINAL
1-3/8"
(35mm)
SHOWER
45" (1143mm)/
48" (1219mm)
2-13/16" C.C.
(72mm)
CL
DIAMETER
WALL
OPENING
1-3/8"
(35mm)
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
PLASTIC
TUB/SHOWER
SURROUND
32" (813mm)
TUB/SHOWER
AND TUB ONLY
FLOOR LINE
FLOOR LINE
THICK WALL APPLICATION
CRITICAL DIMENSIONS
(DO NOT SCALE)
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
THIN WALL APPLICATION
ADA symbol applies to shower
valve control only.
Rev. 2/01