Transcript
Specifications FAUCET DESCRIPTION • Metal construction with various finishes identified by suffix • Includes showerhead, arm, flange and diverter spout OPERATION • Handle operates counterclockwise through a 270˚ arc with off at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 3° FLOW • Showerhead limited to 2.5 gpm max. (9.5 L/min) CARTRIDGE • 1222 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified to meet CSA B-125.1, ASME A112.18.1, ICC A117.1 and all applicable requirements referenced therein • ADA for lever handle BRANTFORD™ POSI-TEMP® Single-Handle Tub/Shower (Trim Only) Models: T2153 series T62153 (Bulk pack 12 per carton) T62156 (Bulk pack less showerhead) WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 2" CC (51mm) 1-7/8" IPS (48mm) MAX WALL 3-1/2” (89mm) FINISHED WALL LINE FACE OF STUD 1/2" MIN. CC (13mm) 5/8" MIN. IPS (16mm) 7-13/16” (199mm) 3/16" (typ) (5mm) 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN. 2-1/2" MAX. (63mm) 4-1/2" (114mm) WALL OPENING CL 7" (178 mm) MIN CL 6'-6" (1981mm) 1 3/8" (35mm) 1-3/8" (35mm) HOT INLET 45" (1143mm)/ 48" (1219mm)-SHOWER 32" (813mm)-TUB OR TUB SHOWER COLD INLET 3-3/8” (86mm) 7“ (178mm) TUB RIM M•Pact™ System FLOOR 1 1/2" (38mm) DIAMETER WALL OPENING 3-7/8“ (99mm) 7" (178 mm) ESCUTCHEON DIAMETER PLASTER GROUND PLASTIC TUB/SHOWER SURROUND FLOOR LINE THIN WALL APPLICATION THICK WALL APPLICATION CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 2/09 FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com