Download Lifescan SureStep Pro User's Manual

BU.book Page 24 Monday, October 28, 2002 11:14 PM
Quality Control Test
◆ IMPORTANT
If you fail to completely insert the test strip,
the test may start; however, you may receive an
out-of-range result.
◆ IMPORTANT
You have up to 2 minutes to insert the test
strip after the control solution is applied. If
you insert the test strip after 2 minutes, you
may get an out-of-range result or an error
message. Discard the test strip and repeat the
test with a new test strip.
10
24
The QC test result appears in approximately
30 seconds. The time may vary depending on
the temperature and glucose level.