Download Kramer Electronics Typewriter SV-552 User's Manual

Contents
Contents
1
2
Introduction
Getting Started
1
1
PART I Your SummitView™ System
2
3
3.1
3.2
3.3
2
2
3
4
Overview
Basic SummitView™ SV-552 Installation
Shielded Twisted Pair and Unshielded Twisted Pair
8-Step SummitView™ Basic System Quick Installation Guide
PART II The SV-552 SummitView™ Processor/Switcher
6
4
4.1
6
9
Defining the SV-552 Processor/Switcher
DDC Support
PART III Detailed Installation Instructions
10
5
5.1
5.2
5.3
6
6.1
6.2
7
7.1
Connecting the SV-552 SummitView™ Processor/ Switcher
Connecting the SV-552 Processor/Switcher
Operating the SV-552 Processor/Switcher Remotely
Installing the SV-552 in a 19” Rack (Optional)
The RC-63DL Room Controller
Defining the RC-63DL
Connecting the Room Controller
Defining and Connecting the Wall Plates
Defining the Wall Plates (U.S.)
10
10
11
12
13
13
15
16
17
7.1.1
7.1.2
7.1.3
7.1.4
Defining the SV-301xl (U.S.)
Defining the SV-302 (U.S.)
Defining the SV-306 (U.S.)
Defining the SV-307 (U.S.)
17
19
20
21
7.2
Defining the Wall Plates (England and Europe)
22
7.2.1
7.2.2
7.2.3
Defining the SV-301xl (England and Europe)
Defining the SV-302 (England and Europe)
Defining the SV-306 (England and Europe)
22
23
24
7.3
Connecting the Wall Plates to the SV-552
25
7.3.1
7.3.2
7.3.3
Connecting the SV-301xl Wall Plate to the SV-552
Connecting the SV-302 Wall Plate to the SV-552
Connecting the SV-306 Wall Plate to the SV-552 (Optional)
25
26
27
8
8.1
8.2
8.3
9
Wiring the TP Line In/Line Out Connectors
Wiring the Twisted Pair RJ-45 Terminals (U.S.)
Wiring the Terminal Block (England and Europe)
Cabling for the SV-306 and SV-307
Grounding the Wall Plate
28
28
29
30
30
PART IV Further information
32
10
32
Customizing the Controllers' Buttons and Labels
i