1
Download HP SN6000 Command Reference Guide
Transcript
2 cryptoCfg To display encryption performance: SecurityAdmin:switch> cryptocfg --perfshow 33 32 38 39 37 36 34 35 43 42 41 40 ================================================================== 5.4m 5.1m 5.4m 47.5m 0 0 0 0 0 0 0 0 47 46 44 45 55 54 52 53 51 50 48 49 Total ================================================================== 0 0 0 0 0 0 0 0 0 0 0 0 75.6m FUNCTION 3. High Availability (HA) cluster configuration SYNOPSIS cryptocfg --help -hacluster cryptocfg --create -hacluster HA_cluster_name [node_WWN [slot]] [node_WWN [slot]] cryptocfg --delete -hacluster HA_cluster_name cryptocfg --delete -stale_dek node_WWN slot cryptocfg --add -haclustermember HA_cluster_name node_WWN [slot] [node_WWN [slot]] cryptocfg --remove -haclustermember HA_cluster_name node_WWN [slot] [node_WWN [slot]] cryptocfg --replace [-haclustermember HA_cluster_name] current_node_WWN [slot] new_node_WWN [slot] cryptocfg --show -hacluster -all | HA_cluster_name DESCRIPTION Use these cryptoCfg commands to configure and manage High Availability (HA) clusters. An HA cluster consists of two encryption engines configured to host the CryptoTargets and to provide the active/standby failover and failback capabilities in a pair-wise relationship in a single fabric. The encryption engines that are part of an HA cluster must belong to the same encryption group and be part of the same fabric. Failure to ensure that HA cluster members are part of the same encryption group dissolves the HA cluster and the encryption engines lose their failover capability. The HA cluster configuration must be performed on the group leader. Configuration changes must be committed before they take effect. Use the cryptocfg --commit command to commit a new configuration or a configuration change. Refer to section "5. Transaction management" for more information. Any operation related to an HA cluster performed without a commit operation will not survive across switch reboots, power cycles, CP failover, or HA reboots. The command group includes a show option, --show -hacluster. When invoked on a member node, this command displays the committed HA cluster configuration. When invoked on the group leader, both defined and committed configuration data is displayed including the following parameters: • • • 200 Encryption group name: A user-defined name Number of HA clusters in the existing encryption group: numeric value For each HA cluster: Fabric OS Command Reference 53-1003108-01
