1
Download HP SN6000 Command Reference Guide
Transcript
2 cryptoCfg nscamshow for remote switches: Switch entry for 2 state rev owner known v611 0xfffc01 Device list: count 13 Type Pid COS PortName NodeName NL 0208d3;3;20:0c:00:06:2b:0f:72:6d;20:00:00:06:2b:0f:72:6d; FC4s: FCP PortSymb:[55]"LSI7404XP-LC BR A.1 03-01081-02D FW:01.03.06 Port 1" Fabric Port Name: 20:08:00:05:1e:34:e0:6b Permanent Port Name: 20:0c:00:06:2b:0f:72:6d Port Index: 8 Share Area: No Device Shared in Other AD: No Redirect: No Partial: No b. Create and enable a zone named "itzone" that includes initiator and target. FabricAdmin:switch> zonecreate itzone, \ "10:00:00:00:c9:2b:c9:3a; 20:0c:00:06:2b:0f:72:6d" FabricAdmin:switch> cfgcreate itcfg, itzone FabricAdmin:switch> cfgenable itcfg You are about to enable a new zoning configuration. This action will replace the old zoning configuration with the current configuration selected. Do you want to enable 'itcfg' configuration \ (yes, y, no, n): [no] y zone config "itcfg" is in effect Updating flash ... 2. Create a disk CryptoTarget container to be hosted on the encryption engine. FabricAdmin:switch> cryptocfg --create -container disk my_disk_tgt1 0:00:00:05:1e:41:9a:7e 20:0c:00:06:2b:0f:72:6d 20:00:00:06:2b:0f:72:6d Operation Succeeded 3. \ Add an initiator to the CryptoTarget container and commit the transaction. FabricAdmin:switch> cryptocfg --add -initiator my_disk_tgt 10:00:00:00:c9:2b:c9:3a 20:00:00:00:c9:2b:c9:3a Operation Succeeded FabricAdmin:switch> cryptocfg --commit Operation Succeeded 4. Display the CTC configuration. FabricAdmin:switch> cryptocfg --show -container my_disk_tgt -cfg Container name: my_disk_tgt Type: disk EE node: 10:00:00:05:1e:41:9a:7e EE slot: 0 Target: 20:0c:00:06:2b:0f:72:6d \ 20:00:00:06:2b:0f:72:6d VT: 20:00:00:05:1e:41:4e:1d \ 20:01:00:05:1e:41:4e:1d 224 \ \ Fabric OS Command Reference 53-1003108-01
