1
Download HP GBE2 User's Manual
Transcript
RMON event information Command: /info/rmon/event RMON Event group configuration: Index ----1 2 3 4 5 10 11 15 100 Type ---both none log trap both both both both both Last Sent ---------------0D: 0H: 1M:20S 0D: 0H: 0M: 0S 0D: 0H: 0M: 0S 0D: 0H: 0M: 0S 0D: 0H: 0M: 0S 0D: 0H: 0M: 0S 0D: 0H: 0M: 0S 0D: 0H: 0M: 0S 0D: 0H: 0M: 0S Description --------------------------------Event_1 Event_2 Event_3 Event_4 Log and trap event for Link Down Log and trap event for Link Up Send log and trap for icmpInMsg Send log and trap for icmpInEchos Event_100 The following table describes the RMON Event Information parameters. Table 43 RMON Event Information: /info/rmon/event Command Usage Index Displays the index number that identifies each event instance. Type Displays the type of notification provided for this event, as follows: none, log, trap, both. Last Sent Displays the time that passed since the last switch reboot, when the most recent event was triggered. This value is cleared when the switch reboots. Description Displays a text description of the event. Link status information Command: /info/link -----------------------------------------------------------------Port Speed Duplex Flow Ctrl Link --------------- --TX-----RX------1 any any yes yes down 2 any any yes yes down 3 1000 full yes yes down 4 100 full yes yes down 5 any any yes yes down 6 any any yes yes down 7 any any yes yes down 8 1000 full no yes up 9 100 full yes yes down 10 100 full yes yes down 11 any any yes yes down 12 any any yes yes down 13 any any yes yes down 14 any any yes yes down 15 any any yes yes down 16 any any yes yes down 17 100 full yes yes down 18 100 full yes yes down 19 100 full yes yes down 20 100 full yes yes down 21 1000 full yes yes down 22 any any yes yes down 23 any any yes yes down 24 any any yes yes down Information Menu 56
