Download HP Z24x User's Manual
Transcript
HP DreamColor Z24x Display User Guide © 2014 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. First Edition: May 2014 Document Part Number: 751586-001 About This Guide This guide provides information on monitor features, setting up the monitor, and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information. iii iv About This Guide Table of contents 1 Product Features ............................................................................................................................................ 1 Z24x Display ......................................................................................................................................... 1 2 Safety and Maintenance Guidelines .............................................................................................................. 3 Important Safety Information ................................................................................................................ 3 Maintenance Guidelines ....................................................................................................................... 4 Cleaning the Monitor ............................................................................................................ 4 Shipping the Monitor ............................................................................................................ 4 3 Setting Up the Monitor ................................................................................................................................... 5 Use Caution When Setting Up the Monitor .......................................................................................... 5 Installing the Stand ............................................................................................................................... 6 Rear Components ................................................................................................................................ 7 Connecting the Cables ......................................................................................................................... 8 Front Panel Controls .......................................................................................................................... 13 Adjusting the Monitor .......................................................................................................................... 14 Turning on the Monitor ....................................................................................................................... 17 HP Watermark and Image Retention Policy ....................................................................................... 18 Connecting USB Devices ................................................................................................................... 18 Removing the Monitor Stand .............................................................................................................. 19 Mounting the Monitor .......................................................................................................................... 20 Mounting the Monitor Using the Quick Release 2 Mounting Bracket ................................ 20 Mounting the Monitor Without Using the Quick Release 2 Mounting Bracket ................... 23 Locating the Serial Number and Product Number .............................................................................. 24 Locating the Information Card ............................................................................................................ 24 Installing a Cable Lock ....................................................................................................................... 25 4 Operating the Monitor .................................................................................................................................. 26 Software and Utilities .......................................................................................................................... 26 The Information File ........................................................................................................... 26 The Image Color Matching File .......................................................................................... 26 v Installing the .INF and .ICM Files ....................................................................................................... 27 Installing from the Disc ...................................................................................................... 27 Downloading from the Internet ........................................................................................... 27 Using Picture-in-Picture (PIP) and Picture-beside-Picture (PBP) ...................................................... 27 DisplayPort Multistreaming ................................................................................................................. 28 Changing the Bezel Button Functions ................................................................................................ 29 Adjusting the Bezel Button LEDs ....................................................................................................... 29 Using Auto-Sleep Mode ..................................................................................................................... 29 Using the On-Screen Display Menu ................................................................................................... 30 Color Management ............................................................................................................................. 36 Color Presets ..................................................................................................................... 36 Color Calibration — Factory .............................................................................................. 36 Color Calibration — User ................................................................................................... 36 Auto EDID Update ............................................................................................................. 37 Appendix A Technical Specifications ............................................................................................................ 38 Z24x Model ......................................................................................................................................... 38 Recognizing Preset Display Resolutions ............................................................................................ 39 Appendix B Support and Troubleshooting ................................................................................................... 40 Solving Common Problems ................................................................................................................ 40 Product Support ................................................................................................................................. 41 Preparing to Call Technical Support ................................................................................................... 41 Appendix C Agency Regulatory Notices ....................................................................................................... 43 Federal Communications Commission Notice ................................................................................... 43 Modifications ...................................................................................................................... 43 Cables ................................................................................................................................ 43 Declaration of Conformity for Products Marked with the FCC Logo (United States Only) ................. 43 Canadian Notice ................................................................................................................................. 44 Avis Canadien .................................................................................................................................... 44 European Union Regulatory Notice .................................................................................................... 44 German Ergonomics Notice ............................................................................................................... 45 Japanese Notice ................................................................................................................................. 45 Korean Notice ..................................................................................................................................... 45 Power Cord Set Requirements ........................................................................................................... 45 Japanese Power Cord Requirements ................................................................................ 45 Product Environmental Notices .......................................................................................................... 46 ENERGY STAR® Qualification .......................................................................................... 46 Materials Disposal ............................................................................................................. 46 vi Disposal of Waste Equipment by Users in Private Household in the European Union ..... 47 HP Recycling Program ...................................................................................................... 47 Chemical Substances ........................................................................................................ 47 Restriction of Hazardous Substances (RoHS) ................................................................... 47 Turkey EEE Regulation ..................................................................................................... 48 Ukraine Restriction of Hazardous Substances .................................................................. 48 Appendix D LCD Monitor Quality and Pixel Policy ....................................................................................... 49 vii viii 1 Product Features Z24x Display The LCD (liquid crystal display) monitor has an active matrix, In-Plane Switching (IPS) panel. The monitor features include: ● 61.0 cm (24-inch) diagonal viewable area display with 1920 x 1200 resolution, plus full-screen support for lower resolutions: includes custom scaling for maximum image size while preserving original aspect ratio ● Wide color gamut to provide 100% coverage of both AdobeRGB and sRGB color spaces ● Ability to accurately remap the color gamut of the monitor (within the supported color gamut of the panel) to enable the selection of the color space and very accurately set the RGB primaries for consistent and repeatable colors ● Very high color and luminance stability (with typical use) ● Calibrated color space factory presets for AdobeRGB, BT. 709, and sRGB so the monitor is ready to use for color critical applications with minimal setup ● Re-calibrateable color presets that allow you to re-calibrate to a standard or custom color space by specifying the color primaries, white point, gamma, and luminance (requires the separately purchased HP DreamColor Calibration Solution kit) ● Option to return to Factory Calibration settings or User Calibration settings to easily restore the monitor to the factory or user settings ● User calibration that requires the DreamColor calibration solution kit (sold separately) ● User adjustable color settings for customers who do not have calibration equipment ● Four reconfigurable front bezel Function buttons to quickly select the most commonly used operations ● Wide viewing angle to allow viewing from a sitting or standing position, or moving from side-toside ● Adjustable tilt, height, swivel, and pivot capabilities ● Removable stand for flexible monitor panel mounting solutions ● HP Quick Release 2 to quickly install the monitor on the stand with a simple click and remove it with the convenient sliding tab release ● Optional thin client mounting bracket that attaches to the rear of the stand (purchased separately) Z24x Display 1 2 ● Easy access pull-out information card with the information needed when contacting HP support ● Video signal inputs to support DisplayPort digital (cable provided), DVI digital (cable provided), and HDMI digital (cable not provided) ● DisplayPort output connector for DisplayPort multistreaming ● Analog audio output for headphones or an optional HP speaker bar ● USB 3.0 hub with one upstream port (cable provided) that connects to the computer and four downstream ports that connect to USB devices ● Plug and play capability if supported by your operating system ● Privacy filter slots to insert filters (purchased separately) to block side screen viewing ● Security slot provision on rear of monitor for optional cable lock ● Cable management feature for placement of cables and cords ● On-Screen Display (OSD) adjustments in several languages for easy setup and screen optimization ● PIP functionality to enable the DisplayPort, DVI, and HDMI inputs to be viewed in a small secondary window or side-by-side on the main window ● HDCP (High-Bandwidth Digital Content Protection) copy protection on all digital inputs ● Software and documentation disc that includes monitor drivers, product documentation, and Windows-based calibration software Chapter 1 Product Features 2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 45. WARNING! To reduce the risk of electric shock or damage to the equipment: • Plug the power cord into an AC outlet that is easily accessible at all times. • Disconnect power from the computer by unplugging the power cord from the AC outlet. • If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug. To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation, setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ ergo. CAUTION: For the protection of the monitor, as well as the computer, connect all power cords for the computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacement Policy so you can replace the equipment, if surge protection fails. Use the appropriate and correctly sized furniture designed to properly support your HP LCD monitor. WARNING! LCD monitors that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause personal injury. Care should be taken to route all cords and cables connected to the LCD monitor so that they can not be pulled, grabbed, or tripped over. Important Safety Information 3 Maintenance Guidelines To enhance the performance and extend the life of the monitor: ● Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. ● Use only a power source and connection appropriate for this monitor, as indicated on the label/ back plate of the monitor. ● Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device. ● Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord. ● Turn the monitor off when not in use. You can substantially increase the life expectancy of the monitor by using a screen saver program and turning off the monitor when not in use. NOTE: Monitors with a “burned-in image” are not covered under the HP warranty. ● Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings. ● Do not drop the monitor or place it on an unstable surface. ● Do not allow anything to rest on the power cord. Do not walk on the cord. ● Keep the monitor in a well-ventilated area, away from excessive light, heat or moisture. ● When removing the monitor stand, you must lay the monitor face down on a soft area to prevent it from getting scratched, defaced, or broken. Cleaning the Monitor 1. Turn off the monitor and unplug the power cord from the back of the unit. 2. Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth. 3. For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol. CAUTION: Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen surface. Never spray the cleaner directly on the screen surface. It may run behind the bezel and damage the electronics. CAUTION: Do not use cleaners that contain any petroleum based materials such as benzene, thinner, or any volatile substance to clean the monitor screen or cabinet. These chemicals may damage the monitor. Shipping the Monitor Keep the original packing box in a storage area. You may need it later if you move or ship the monitor. 4 Chapter 2 Safety and Maintenance Guidelines 3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power switch turns off all power to the monitor. Use Caution When Setting Up the Monitor To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the panel may cause non-uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its normal condition. If installing a base, lay the monitor face down on a flat surface covered with a protective sheet foam or non-abrasive cloth. This prevents the screen from getting scratched, defaced or broken as well as damage to the front panel buttons. NOTE: Your monitor may look different from the monitor in this illustration. Use Caution When Setting Up the Monitor 5 Installing the Stand CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause nonuniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its normal condition. The display uses the HP Quick Release 2 for easy moving of the monitor. To mount the panel onto the stand: 1. Lay the monitor panel face down on a flat surface covered by a clean, dry cloth. 2. Slide the top of the mounting plate (1) on the stand under the upper lip of the recess in the back of the panel. 3. Lower the bottom of the stand's mounting plate (2) into the recess until it snaps into place. 4. The HP Quick Release 2 latch (3) pops up when the stand is locked in place. NOTE: If you are mounting the monitor to a mounting fixture instead of the stand refer to Mounting the Monitor on page 20. 6 Chapter 3 Setting Up the Monitor Rear Components Component Function 1 USB 3.0 Downstream Connectors (side panel) Connects optional USB devices to the monitor. 2 Master Power Switch Turns off all power to the monitor. NOTE: Putting the switch in the Off position will yield the lowest power state for the monitor when not in use. 3 AC Power Connector Connects the AC power cord to the monitor. 4 DisplayPort IN Connects the DisplayPort cable to the monitor. 5 DVI-D Connects the DVI-D cable to the monitor. 6 HDMI Connects an HDMI cable to the monitor. 7 DisplayPort OUT Connects a second monitor. 8 Audio Out Connects headphones or optional HP Speaker Bar to the monitor. 9 USB 3.0 Upstream Connector Connects the USB hub cable to the monitor's USB hub connector and to a host USB port/hub. 10 USB 3.0 Downstream Connectors Connects optional USB devices to the monitor. Rear Components 7 Connecting the Cables 8 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Before connecting the cables, route the cables through the cable routing hole in the center of the stand. Chapter 3 Setting Up the Monitor 3. Depending on your configuration, connect either the DisplayPort, DVI, or HDMI video cable between the PC and the monitor. NOTE: The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected through the OnScreen Display (OSD) feature by pressing one of the five front bezel buttons to activate the buttons, and then press the bottom Open Menu button to open the OSD. In the OSD select Video Input and choose the desired input source. ● For DisplayPort digital operation, connect the DisplayPort signal cable to the DisplayPort IN connector on the rear of the monitor and the other end to the DisplayPort connector on the computer (cable provided). NOTE: You must connect the DisplayPort cable to the DisplayPort IN connector, not the DisplayPort OUT connector. The monitor will not function if you connect the cable between the DisplayPort OUT connector and the computer. Connecting the Cables 9 10 ● For DVI digital operation, connect the DVI-D signal cable to the DVI connector on the rear of the monitor and the other end to the DVI connector on the computer (cable provided). ● For HDMI digital operation, connect the HDMI signal cable to the HDMI connector on the rear of the monitor and the other end to the HDMI connector on the computer (cable not provided). Chapter 3 Setting Up the Monitor 4. Connect one end of the provided USB cable to the USB hub connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor. NOTE: The monitor supports USB 3.0. For optimal performance, connect the USB cable to a USB 3.0 port on the computer, if available. Connecting the Cables 11 5. Connect one end of the power cord to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet. NOTE: The master power switch on the rear of the monitor must be in the On position before pressing the power button on the front of the monitor. WARNING! To reduce the risk of electric shock or damage to the equipment: Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet. If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug. 12 Chapter 3 Setting Up the Monitor Front Panel Controls Control Function 1 Function buttons Use these buttons to navigate through the OSD based on the indicators next to the buttons that are activated while the OSD is open. 2 Open Menu button Opens and closes the OSD. NOTE: To activate the Open Menu button and the Function buttons, press any of the buttons so that the button labels appear on the right side of the screen and the button LEDs are lit. 3 Power button Turns the monitor on or off. NOTE: Be sure the master power switch on the rear of the monitor is in the ON position to turn on the monitor. NOTE: To view an OSD menu simulator, visit the HP Customer Self Repair Services Media Library at http://www.hp.com/go/sml. NOTE: You can adjust the bezel button brightness and change the function of the buttons in the OSD. Refer to Adjusting the Bezel Button LEDs on page 29 and Changing the Bezel Button Functions on page 29 for more information. Front Panel Controls 13 Adjusting the Monitor 14 1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. 2. Swivel the monitor to the left or right for the best viewing angle. Chapter 3 Setting Up the Monitor 3. Adjust the monitor’s height to a comfortable position for your individual workstation. The monitor’s top bezel edge should not exceed a height that is parallel to your eye height. A monitor that is positioned low and reclined may be more comfortable for users with corrective lenses. The monitor should be repositioned as you adjust your working posture throughout the work day. 4. You can pivot the monitor from landscape to portrait orientation viewing to adapt to your application. a. Adjust the monitor to full height position and tilt the monitor back to full tilt position (1). b. Pivot the monitor clockwise 90° from landscape to portrait orientation (2). CAUTION: If the monitor is not in full height and full tilt position when pivoting, the bottom right corner of the monitor panel will come in contact with the base and potentially cause damage to the monitor. If you are adding an optional speaker bar to the monitor, install it after pivoting the monitor. The speaker bar will come in contact with the base when pivoting and potentially cause damage to the monitor or speaker bar. Adjusting the Monitor 15 NOTE: The monitor includes an auto-rotation sensor that automatically changes the displayed OSD from landscape to portrait when rotated. Use the operating system's display settings to rotate the image on the screen from portrait to landscape. 16 Chapter 3 Setting Up the Monitor Turning on the Monitor 1. Set the master power switch on the rear of the monitor to the On position. 2. Press the power button on the computer to turn it on. 3. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens. Monitors with a “burned-in image” are not covered under the HP warranty. * A prolonged period of time is 12 consecutive hours of a static image. NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be enabled. To disable this feature, press and hold the monitor power button for 10 seconds. When the monitor is powered on, a Monitor Status message is displayed for five seconds. The message shows which input is the current active signal, the status of the auto-switch source setting (On or Off; factory default is On), the default source signal (factory default is DisplayPort), the current preset display resolution, and the recommended preset display resolution. The monitor automatically scans the signal inputs for an active input and uses that input for the display. If two or more inputs are active, the monitor will display the default input source. If the default source is not one of the active inputs, then the monitor will display the highest ranking priority input. You can select the input source in the OSD. Press one of the five front bezel buttons to activate the buttons, and then press the bottom Open Menu button to open the OSD. In the OSD select Video Input and choose the desired input source. Turning on the Monitor 17 HP Watermark and Image Retention Policy The IPS monitor models are designed with IPS (In-Plane Switching) display technology which provides ultra-wide viewing angles and advanced image quality. IPS monitors are suitable for a wide variety of advanced image quality applications. This panel technology, however, is not suitable for applications that exhibit static, stationary or fixed images for long periods of time without the use of screen savers. These types of applications may include camera surveillance, video games, marketing logos, and templates that are displayed on the screen for a prolonged period of time. Static images may cause image retention damage that could look like stains or watermarks on the monitor's screen. Monitors in use for 24 hours per day that result in image retention damage are not covered under the HP warranty. To avoid image retention damage, always turn off the monitor when it is not in use or use the power management setting, if supported on your system, to turn off the display when the system is idle. Connecting USB Devices There are four downstream USB ports on the monitor (two on the rear and two on the side). NOTE: You must connect the USB hub cable from the monitor to the computer to enable the USB ports on the monitor. Refer to Step 4 in Connecting the Cables on page 8. 18 Chapter 3 Setting Up the Monitor Removing the Monitor Stand You can remove the monitor panel from the stand to install the panel on a wall, a swing arm, or other mounting fixture. CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. Also disconnect any other cables connected to the monitor. 1. Disconnect and remove the signal, power, and USB cables from the monitor. 2. Lay the monitor face down on a flat surface covered by a clean, dry cloth. 3. Press down on the latch near the bottom center of the monitor to unlock the HP Quick Release 2 (1). 4. Swing the bottom of the stand up until the mounting plate clears the recess in the panel (2). 5. Slide the stand out of the recess (3). Removing the Monitor Stand 19 Mounting the Monitor The monitor panel can be attached to a wall, swing arm, or other mounting fixture. You can attach the monitor panel to a mounting fixture using the HP Quick Release 2 mounting bracket or you can attach the monitor panel to a mounting fixture without the HP Quick Release 2 mounting bracket. NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket. CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are required. Longer screws must not be used because they may damage the monitor. It is important to verify that the manufacturer’s mounting solution is compliant with the VESA standard and is rated to support the weight of the monitor display panel. For best performance, it is important to use the power and video cables provided with the monitor. Mounting the Monitor Using the Quick Release 2 Mounting Bracket To mount the monitor panel to a mounting fixture using the Quick Release 2 mounting bracket: 1. 20 Remove the four screws holding the mounting plate to the head of the stand. Chapter 3 Setting Up the Monitor 2. Remove the four screws from the mounting plate to separate the mounting plate from its cover. 3. Remove the four screws from the VESA holes located on the rear of the monitor panel. Mounting the Monitor 21 22 4. Install the mounting plate to the wall or swing arm of your choice using the four screws that were removed from the VESA holes on the rear of the monitor panel. 5. Place the monitor panel on the mounting bracket you've installed by aligning its recess with the mounting bracket, then sliding it down over the top of the bracket and pressing it back into place against the bracket. The release latch on the monitor will pop up when the monitor is safely locked in place. Chapter 3 Setting Up the Monitor Mounting the Monitor Without Using the Quick Release 2 Mounting Bracket To mount the monitor panel directly to a mounting fixture without using the HP Quick Release 2 mounting bracket, use the four screws removed from the VESA holes on the rear of the monitor panel and install them to attach the mounting device to the rear of the monitor panel. Mounting the Monitor 23 Locating the Serial Number and Product Number The serial number and product number are located on a label on the rear panel of the display head. You may need these numbers when contacting HP about the monitor model. NOTE: You may need to partially pivot the display head to read the label. Locating the Information Card Identifying information is located on the pull-out card (and included on a label on the back of the monitor). The card pulls out from behind the USB connectors on the left side of the panel. Warranty support information (model number, serial number, product number) is printed on the front of the card (and the label) and regulatory information is printed on the back of the card. 24 Chapter 3 Setting Up the Monitor Installing a Cable Lock You can secure the monitor to a fixed object with an optional cable lock available from HP. Installing a Cable Lock 25 4 Operating the Monitor Software and Utilities The disc that comes with the monitor contains files you can install on the computer: ● an .INF (Information) file ● ICM (Image Color Matching) files (one for each calibrated color space) ● color calibration software NOTE: If the monitor does not include a disc, the .INF and .ICM files can be downloaded from the HP monitors support Web site. See Downloading from the Internet on page 27 in this chapter. The Information File The .INF file defines monitor resources used by Microsoft Windows operating systems to ensure monitor compatibility with the computer’s graphics adapter. This monitor is Microsoft Windows Plug and Play compatible and the monitor will work correctly without installing the .INF file. Monitor Plug and Play compatibility requires that the computer’s graphic card is VESA DDC2–compliant and that the monitor connects directly to the graphics card. Plug and Play does not work through separate BNC type connectors or through distribution buffers/ boxes. The Image Color Matching File The .ICM files are data files that are used in conjunction with graphics programs to provide consistent color matching from monitor screen to printer, or from scanner to monitor screen. This file is activated from within graphics programs that support this feature. NOTE: The ICM color profile is written in accordance with the International Color Consortium (ICC) Profile Format specification. 26 Chapter 4 Operating the Monitor Installing the .INF and .ICM Files After you determine that you need to update, you can install the .INF and .ICM files from the disc or download them. Installing from the Disc To install the .INF and .ICM files on the computer from the Disc: 1. Insert the disc in the computer optical drive. The disc menu is displayed. 2. View the HP Monitor Software Information file. 3. Select Install Monitor Driver Software. 4. Follow the on-screen instructions. 5. Ensure that the proper resolution and refresh rates appear in the Windows Display control panel. NOTE: You may need to install the digitally signed monitor .INF and .ICM files manually from the disc in the event of an installation error. Refer to the HP Monitor Software Information file on the disc. Downloading from the Internet To download the latest version of .INF and .ICM files from the HP monitors support Web site: 1. Go to http://www.hp.com/support and select the country region. 2. Select the Drivers & Downloads link then enter Z24x in the search box and click the Go button. 3. Select your model then select your language and operating system. 4. Download the software by following the instructions. Using Picture-in-Picture (PIP) and Picture-beside-Picture (PBP) The monitor supports both PIP, where one source is overlaid over another, and PBP, where one source is positioned adjacent to another either horizontally (for landscape orientation) or vertically (for portrait orientation). To use PIP or PBP: 1. Connect a secondary input source to the monitor. 2. Press one of the five front bezel buttons to activate the buttons, and then press the bottom Open Menu button to open the OSD. 3. In the OSD, select PIP Control > PIP On/Off and then select either Picture-in-Picture or Picture-beside-Picture. 4. The monitor will scan the secondary inputs for a valid input and use that input for the PIP/PBP picture. If you want to change the PIP/PBP input, select PIP Input in the OSD and select the desired input (DisplayPort, DVI, or HDMI). Installing the .INF and .ICM Files 27 5. If you want to change the size of the PIP, select PIP Size in the OSD then select either Large or Small. 6. If you want to adjust the position of the PIP, select PIP Position in the OSD, then select either Top Left, Top Right, Bottom Left, or Bottom Right. DisplayPort Multistreaming If you are using DisplayPort as the primary video input source, you can multistream to other DisplayPort monitors connected in a daisy chain configuration. You can connect up to four monitors in this configuration if supported by the graphics card. To use DisplayPort multistreaming: 1. Make sure that DisplayPort is used for your primary video input. 2. Add a second monitor by connecting a DisplayPort cable between the DisplayPort OUT connector on the primary monitor and the DisplayPort IN connector on a secondary multistream monitor or the DisplayPort input connector on a secondary non-multistream monitor. 3. You can set the connected monitor to display the same image as the primary monitor or a different image. In the OSD for the connected monitor, select Management > DisplayPort Output and select one of the following: 4. a. DisplayPort 1.1 Compatibility Mode (default) - allows the same video image to be sent to all monitors downstream of the monitor you are configuring b. DisplayPort 1.2.- allows a different image to be sent to all monitors downstream of the monitor you are configuring After setting the DisplayPort Compatibility Mode in the OSD, use the computer operating system's display settings to set the display mode for the secondary monitor to either mirror the image of the primary display or extend the second display for a different image from the primary display. If you wish to connect additional monitors downstream (up to four maximum), all but the final monitor in the chain must support DisplayPort multstreaming. 28 Chapter 4 Operating the Monitor Connect from the DisplayPort OUT of one monitor to the DisplayPort IN of the next, until you have the desired number of displays. If you want different information on each screen be sure that all upstream monitors are configured to DisplayPort 1.2 mode, as described above. The number of monitors you can connect through DisplayPort multistreaming depends on a number of factors, including the resolutions and scan rates used for each monitor and the capabilities of your GPU or embedded graphics system. Check the manual that came with your graphics card for further information on its capabilities. Changing the Bezel Button Functions You can change the top-level front bezel button functions from their default values so that when the buttons are activated you can quickly access commonly used menu items. To change the bezel button functions: 1. Press one of the five front bezel buttons to activate the buttons, and then press the bottom Open Menu button to open the OSD. 2. In the OSD, select Menu and Message Control > Configure Function Buttons and then select one of the available options for the button you want to reconfigure. Adjusting the Bezel Button LEDs The bezel button LEDs have an automatic fade-out feature that is active by default. The LEDs will fade after the OSD timeout period. You can change the LED behavior so that they do not fade out and you can also adjust the brightness of the LEDs if the fade-out feature is disabled. To disable the bezel button fade-out feature: 1. Press one of the five front bezel buttons to activate the buttons, and then press the bottom Open Menu button to open the OSD. 2. In the OSD, select Menu and Message Control > Bezel Button Auto-Fade > Disable (Always On). If the bezel button fade-out feature has been disabled (as described above), you can adjust the brightness of the buttons on the front bezel to different levels of ambient lighting. To change the bezel button brightness: 1. Press one of the five front bezel buttons to activate the buttons, and then press the bottom Open Menu button to open the OSD. 2. In the OSD, select Menu and Message Control > Bezel Button Brightness and use the adjustment scale to set the buttons to the desired brightness. Using Auto-Sleep Mode The display supports an OSD (On-Screen Display) option called Auto-Sleep Mode that allows you to enable or disable a reduced power state for the display. When Auto-Sleep Mode is enabled (enabled by default), the monitor will enter a reduced power state when the host PC signals low power mode (absence of either horizontal or vertical sync signal). Changing the Bezel Button Functions 29 Upon entering this reduced power state sleep mode, the monitor screen is blanked, the backlight is turned off and the power LED indicator turns amber. The monitor draws less than 0.5W of power when in this reduced power mode. The monitor will wake from the sleep mode when the host PC sends an active signal to the monitor (for example, if you activate the mouse or keyboard). You can disable the Auto-Sleep Mode in the OSD. Press one of the five front bezel buttons to activate the buttons, and then press the bottom Open Menu button to open the OSD. In the OSD press Management > Auto-Sleep > Disable. Using the On-Screen Display Menu Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To access the OSD, do the following: 1. Press any of the five buttons on the right side of the front bezel to activate the buttons. 2. Press the bottom Open Menu button to open the OSD. 3. Use the top four Function buttons to navigate, select, and adjust the menu choices. The button labels are variable depending on the menu or sub-menu that is active. NOTE: OSD menu items that are grayed out are not supported with the selected video input and settings. The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. 30 Chapter 4 Operating the Monitor Level 1 Level 2 Color Space sRGB Level 3 AdobeRGB BT.709 User Native RGB Adjust Warm Neutral Cool Custom (RGB) Adjust Luminance Set Luminance Value Back Color Space Information Current Color Primaries (u'v' / xy) ● Red: x.xxx x.xxx ● Blue: x.xxx x.xxx ● Green: x.xxx x.xxx White Point (u'v' / xy) ● x.xxx x.xxx ● Name of White Point (ex. D65) Gamma (x.x or sRGB) Switch coordinate display to xy/u'v' (allows you to switch the information to display as either CIE 1931 xy or CIE 1976 u'v') Back Reset to Last Calibration Reset to Factory Calibration Back Using the On-Screen Display Menu 31 Level 1 Level 2 Video Input DisplayPort Level 3 DVI HDMI Auto-Switch Source Enable Disable Back Back Image Adjustment Aspect Ratio Display Fill to Source Aspect Ratio (Proportional) Fill to Entire Screen (Non-Proportional) Pixel-for-Pixel Back Sharpness Soft Level 2 Level 3 Level 4 Sharp Back Dynamic Contrast Enable Disable Back Back Display Mode Information 32 Chapter 4 Operating the Monitor Level 1 Level 2 Level 3 PIP Control PIP On/Off Picture-in-Picture Picture-beside-Picture Off Back PIP Size Large Small Back PIP Position Top Left Top Right Bottom Left Bottom Right Back PIP Input DisplayPort DVI HDMI Back Primary / PIP Source Information Back Language Deutsch Traditional Chinese Simplified Chinese English Español Français Italiano Japanese Nederlands Português Using the On-Screen Display Menu 33 Level 1 Level 2 Level 3 Management Auto-Sleep Mode Enable Disable Back Power On Recall Enable Disable Back DDC/CI Communications Enable Disable Back Auto EDID Update Enable Disable Back Hot Plug Initiate Enable Disable Back DisplayPort Compatibility DisplayPort 1.1 Compatibility Mode DisplayPort 1.2 Back Back 34 Chapter 4 Operating the Monitor Level 1 Level 2 Level 3 Menu and Message Control Position Use the buttons to adjust the position of the Menu. Press "Back" when you are finished. Opacity Set Opacity Value Back Timeout Set Timeout Value Back Configure Function Buttons Configure Function Button 1 Configure Function Button 2 Configure Function Button 3 Configure Function Button 4 Bezel Button Brightness Set Brightness Value Back Bezel Button Auto-Fade Enable (Obey Menu Timeout) Disable (Always On) Back Back Information Current Display Mode: Display Mode Color Space: Color Space Serial Number: Serial Number Firmware Revision: Firmware Revision IDs Last Calibration: xxxxx Hours Backlight Hours: xxxxx Hours Back Factory Reset Using the On-Screen Display Menu 35 Color Management The monitor includes both standard and user definable color space settings to support a variety of customer uses. Most color spaces are pre-calibrated at the factory and can be recalibrated by the end user when the HP DreamColor Calibration Solution kit is used (sold separately). Calibration includes control of the monitor’s color gamut, RGB primaries, gamma, and luminance. The RGB Adjust color selections are not calibrated and cannot be calibrated. Color Presets The calibrated color space presets are defined as follows: Color Preset Red Primary Green Primary Blue Primary White Point Gamma Luminance u' v' u' v' u' v' sRGB 0.451 0.523 0.125 0.563 0.175 0.158 D65 sRGB 250 AdobeRGB 0.451 0.523 0.076 0.576 0.175 0.158 D65 2.2 250 BT.709 0.451 0.523 0.125 0.563 0.175 0.158 D65 2.4 120 User User User User User User User User User User Native Panel Panel Panel Panel Panel Panel Panel 2.2 Max (100%) (cd/m2) User adjustment of luminance above or below the target luminance is possible for each color space while maintaining the accuracy of the primaries and the white point. The RGB Adjust color selections are not calibrated and include: ● Warm (approximately 5000K) ● Neutral (approximately 6500K) ● Cool (approximately 9300 K) ● Custom (RGB) (user adjustable setting for red, green, and blue) Color Calibration — Factory Three standard color spaces, sRGB, AdobeRGB, and BT.709, are calibrated at the factory and a onepage calibration report is printed and included in each monitor carton. Native color space is configured at the factory to provide the maximum panel luminance. The default setting for the User color space is the same as Native. Factory calibration settings are saved in monitor memory and can be re-applied at any time through the On-Screen Display. Color Calibration — User With the exception of the native panel color space, each color space can be calibrated by the end user with the user calibration software that comes with the product and with a colorimeter device (the colorimeter is included in the DreamColor Calibration Solution option kit, sold separately). The user 36 Chapter 4 Operating the Monitor calibration software is a Windows-based application that requires use of the Windows 7 or later operating system. The calibration process uses the following steps: 1. Insert the monitor documentation disc into the host computer’s CD/DVD player. 2. Install the user calibration program on the host computer. 3. Place the colorimeter from the DreamColor Calibration Solutions kit in front of the monitor panel as directed. 4. Run the calibration software and follow the on-screen steps. One color space can be calibrated and named at a time. Two methods of calibration are possible: ● Wizard mode – the application will ask questions about the user’s environment and usage then will suggest settings to be used. ● Expert mode – the user will be asked to input all the variables intended for use in the calibration process. When calibration is complete, the values are saved in monitor memory. The most recent calibration settings can be re-applied at any time through the On-Screen Display. Auto EDID Update By default, the display automatically updates the display EDID when you switch color spaces. If Auto EDID Update is enabled, the EDID will be updated for all inputs every time you change the active color space preset. If Auto EDID Update is disabled, each input will be set to the factory default values for the Native color space. You can enable or disable Auto EDID Update in the OSD: 1. Press any of the five front bezel buttons on the right side of the front bezel to activate the buttons. 2. Press the bottom Open Menu button to open the OSD. 3. In the OSD, select Management > Auto EDID Update and then select either Enable or Disable. Color Management 37 A Technical Specifications NOTE: All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. Z24x Model Display 61.0 cm wide screen 24 inches wide screen Type IPS LCD Viewable Image Size 61.0 cm diagonal 24–inch diagonal Maximum Weight (Unpacked) 7.08 kg 15.61 lbs Height (highest position) 52.5 cm 20.67 inches Height (lowest position) 40.5 cm 15.94 inches Depth 23.798 cm 9.37 inches Width 55.94 cm 22.02 inches Maximum Graphic Resolution 1920 x 1200 (60 Hz) digital input Optimum Graphic Resolution 1920 x 1200 (60 Hz) digital input Dimensions (include base) Environmental Requirements Temperature Operating Temperature 5 to 35° C 41 to 95° F Storage Temperature -20 to 60° C -4 to 140° F Power Source 100 – 240 VAC 50/60 Hz Input Terminal One DisplayPort IN connector; one DVI connector; one HDMI connector NOTE: For the latest specifications or additional specifications on this product, go to http://www.hp.com/go/productbulletin and search for your specific display model to find the model-specific QuickSpecs. 38 Appendix A Technical Specifications Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the screen. Preset Pixel Format Aspect Ratio Vert Freq (Hz) Pixel Clk (MHz) 1 640 × 480 4:3 60(p) 25.175 2 720 × 480 4:3 60(i) 27.000 3 720 × 480 4:3 60(p) 27.000 4 720 × 480 16:9 60(i) 27.000 5 720 × 480 16:9 60(p) 27.000 6 720 × 576 4:3 50(i) 27.000 7 720 × 576 4:3 50(p) 27.000 8 720 × 576 16:9 50(i) 27.000 9 720 × 576 16:9 50(p) 27.000 10 800 × 600 4:3 60.317 40.000 11 1024 × 768 4:3 60.004 65.000 12 1280 × 720 16:9 24(p) 59.400 13 1280 × 720 16:9 30(p) 74.250 14 1280 × 720 16:9 50(p) 74.250 15 1280 × 720 16:9 60(p) 74.250 16 1280 × 1024 5:4 60.020 108.000 17 1366 × 768 16:9 60.000 72.000 18 1600 × 1200 4:3 60.000 162.000 19 1920 × 1080 16:9 24(p) 74.250 20 1920 × 1080 16:9 30(p) 74.250 21 1920 × 1080 16:9 50(i) 74.250 22 1920 × 1080 16:9 50(p) 148.500 23 1920 × 1080 16:9 60(i) 74.250 24 1920 × 1080 16:9 60(p) 148.500 25 1920 × 1200 16:10 59.950 154.000 NOTE: Interlaced modes are indicated by (i); progressive scan modes are indicated by (p). If no indication is given, the mode is progressive scan. Recognizing Preset Display Resolutions 39 B Support and Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank or video is flashing. Power cord is disconnected. Connect the power cord. Power button on front panel of the monitor is turned off. Press the front panel power button. NOTE: If pressing the power button has no effect, press and hold the power button for 10 seconds to disable the power button lockout feature. Video cable is improperly connected. Connect the video cable properly. Refer to Setting Up the Monitor on page 5 for more information. NOTE: If using DisplayPort input, make sure the cable is connected to the DisplayPort IN connector located at the rear center of the monitor. The monitor will not function if the cable is connected to the DisplayPort OUT connector. 40 Screen blanking is active. Press any key on the keyboard or move the mouse to inactivate the screen blanking utility. Video card compatibility. Open the OSD menu and select the Video Input menu. Set Input Auto-Switch Source to Disable and manually select the input. Monitor will not turn on. Master power switch on rear panel of the monitor is turned Off. Turn the master power switch to On. Image appears blurred, indistinct, or too dark. Brightness is too low. Open the OSD menu and select Color Space > Adjust Luminance to adjust the luminance scale as needed. Sharpness is too soft. Open the OSD menu and select Image Adjustment > Sharpness to select a sharpness level. Check Video Cable is displayed on screen. Monitor video cable is disconnected. Connect the appropriate video signal cable between the computer and monitor. Be sure that the computer power is off while connecting the video cable. Input Signal Out of Range is displayed on screen. Video resolution and/or refresh rate are set higher than what the monitor supports. Change the settings to a supported setting (see Recognizing Preset Display Resolutions on page 39). Appendix B Support and Troubleshooting Problem Possible Cause Solution The monitor is off but it did not seem to enter into a low-power sleep mode. The monitor's power saving control is disabled. Open the OSD menu and select Management > AutoSleep and set auto-sleep to Enable. OSD Lockout is displayed. The monitor's OSD Lockout function is enabled. Press and hold the bottom Menu button for 10 seconds to disable the OSD Lockout function. Power Button Lockout is displayed. The monitor's Power Button Lockout function is enabled. Press and hold the power button for 10 seconds to unlock the power button function. Bezel button LEDs are not on. By default, the Bezel button LEDs are set to fade out when not in use. To set the bezel button LEDs so that they are always on, open the OSD menu and select Menu and Message Control > Bezel Button Auto-Fade > Disable (Always On). Bezel button LEDs are always on but are too bright or too dim. Bezel button auto-fade has been turned off in the OSD and the brightness needs adjustment. Open the OSD menu and select Menu and Message Control > Bezel Button Brightness and adjust the brightness value. Displayed colors do not look correct. Monitor is not calibrated. Recalibrate monitor or perform a Factory Reset. Calibration failed. Incorrect setup or equipment failure. Redo calibration. Product Support For additional information on using your all-in-one, go to http://www.hp.com/support. Select your country or region, select Troubleshooting, and then enter your model in the search window and click the Go button. NOTE: The monitor user guide, reference material, and drivers are available at http://www.hp.com/ support. If the information provided in the guide does not address your questions, you can contact support. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. Here you can: ● Chat online with an HP technician NOTE: When support chat is not available in a particular language, it is available in English. ● Find support telephone numbers ● Locate an HP service center Preparing to Call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. Have the following information available when you call: ● Monitor model number ● Monitor serial number Product Support 41 42 ● Purchase date on invoice ● Conditions under which the problem occurred ● Error messages received ● Hardware configuration ● Name and version of the hardware and software you are using Appendix B Support and Troubleshooting C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and the receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett Packard Company may void the user's authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. Declaration of Conformity for Products Marked with the FCC Logo (United States Only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. For questions regarding the product, contact: Federal Communications Commission Notice 43 Hewlett Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-HP-INVENT (1-800 474-6836) For questions regarding this FCC declaration, contact: Hewlett Packard Company P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. CAN ICES-3(B)/NMB-3(B) Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. European Union Regulatory Notice Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable: ● Low Voltage Directive 2006/95/EC; EMC Directive 2004/108/EC; Ecodesign Directive 2009/125/ EC; R&TTE Directive 1999/5/EC; RoHS Directive 2011/65/EU ● Compliance with these directives is assessed using applicable European Harmonised Standards. ● The full Declaration of Conformity can be found at the following web site: http://www.hp.eu/ certificates. ● (Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) The point of contact for regulatory matters is Hewlett-Packard GmbH, Dept./MS:HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, GERMANY. 44 Appendix C Agency Regulatory Notices German Ergonomics Notice HP products which bear the “GS” approval mark, when forming part of a system comprising HP brand computers, keyboards and monitors that bear the “GS” approval mark, meet the applicable ergonomic requirements. The installation guides included with the products provide configuration information. Japanese Notice Korean Notice Power Cord Set Requirements The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100–120V or 200–240V. The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where you purchased the equipment. If you need to obtain a power cord for a different country, you should purchase a power cord that is approved for use in that country. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the cross-sectional area of the wire must be a minimum of 0.75 mm² or 18 AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact an authorized HP service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japanese Power Cord Requirements For use in Japan, use only the power cord received with this product. CAUTION: Do not use the power cord received with this product on any other products. German Ergonomics Notice 45 Product Environmental Notices ENERGY STAR® Qualification As an ENERGY STAR® Partner, Hewlett Packard Company has followed the EPA's enhanced product qualification and certification process to ensure that the products marked with the ENERGY STAR® logo are ENERGY STAR® qualified per the applicable ENERGY STAR® guidelines for energy efficiency. The following ENERGY STAR® certification mark appears on all ENERGY STAR® qualified displays: The ENERGY STAR® program specifications for displays and computers were created by the EPA to promote energy efficiency and reduce air pollution through more energy-efficient equipment in homes, offices, and factories. One way products achieve this goal is by using the Microsoft Windows power management feature to reduce power consumption when the product is not in use. The power management feature enables the computer to initiate a low-power or “sleep” mode after a period of user inactivity. When used with an external ENERGY STAR® qualified display, this feature also supports similar power management features for the display. To take advantage of these potential energy savings, users should use the default power management settings that are provided with ENERGY STAR qualified computers and displays. The default power management settings on ENERGY STAR® qualified computers are preset to behave in the following ways when the system is operating on AC power: ● Turn off an external display after 15 minutes of user inactivity ● Initiate a low power sleep mode for the computer after 30 minutes of user inactivity ENERGY STAR® qualified computers exit the low power sleep mode and ENERGY STAR® qualified displays resume operation when the user resumes use of the computer. Examples include the user pressing the power/sleep button, receiving an input signal from an input device, receiving an input signal from a network connection with the Wake On LAN (WOL) feature enabled, etc. Additional information on the ENERGY STAR® program, its environmental benefits and the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR® Power Management Web site at http://www.energystar.gov/powermanagement. Materials Disposal Some HP LCD monitors contain mercury in the fluorescent lamps that might require special handling at end-of-life. Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact the local authorities or the Electronic Industries Alliance (EIA) http://www.eiae.org. 46 Appendix C Agency Regulatory Notices Disposal of Waste Equipment by Users in Private Household in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling or waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact the local city office, the household waste disposal service or the shop where you purchased the product. HP Recycling Program HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/ recycle. Chemical Substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. Restriction of Hazardous Substances (RoHS) A Japanese regulatory requirement, defined by specification JIS C 0950, 2005, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. Product Environmental Notices 47 11363-2006 11363-2006 Turkey EEE Regulation In Conformity with the EEE Regulation EEE Yönetmeliğine Uygundur Ukraine Restriction of Hazardous Substances The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 No. 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment. 48 Appendix C Agency Regulatory Notices D LCD Monitor Quality and Pixel Policy The TFT monitor uses high-precision technology, manufactured according to HP standards, to guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to the HP LCD. These imperfections are caused by one or more defective pixels or sub-pixels. ● A pixel consists of one red, one green, and one blue sub-pixel. ● A defective whole pixel is always turned on (a bright spot on a dark background), or it is always off (a dark spot on a bright background). The first is the more visible of the two. ● A defective sub-pixel (dot defect) is less visible than a defective whole pixel and is small and only visible on a specific background. To locate defective pixels, the monitor should be viewed under normal operating conditions, in normal operating mode at a supported resolution and refresh rate, from a distance of approximately 50 cm (20 in). HP expects that, over time, the industry will continue to improve its ability to produce LCDs with fewer cosmetic imperfections and HP will adjust guidelines as improvements are made. 49