Download HP 1055CM User's Manual
Transcript
Removal and Installation Media Sensor Removal WARNING Switch off the printer and remove the power cord. 1. Remove the following: 1. "Center Guide" see page 8-71. 2. Carefully remove the media sensor (item 2) from underneath the center guide (item 1) (refer to Figure 25). 2 1 Figure 25: Media Sensor NOTE You may also be able to remove the Media Sensor as follows: 1. Remove the following: 1. "Electronics Module" see page 8-25. 2. Reach underneath the Center Guide and carefully remove the media sensor by pulling it gently down. HP DesignJets 1050C and 1055CM Printers Service Manual 8-29