Transcript
Quick Start Guide ST06-15U1 15" Liquid Crystal Display TV This Guide is designed as a reference to help you start using your LCD TV quickly. Please Refer to the User's Manual for more detailed installation and safety instructions. Front View Rear View R L VIDEO AV1 DC-IN ANT AV 2 LINE OUT S-VIDEO VO L CH MENU MUTE SOURCE Speakers Remote IR sensor VO CH L Volume adjust Channel select R L VIDEO AV1 MENU DC-IN MUTE ANT SOURCE AV 2 LINE OUT S-VIDEO Headphone jack Mute Source Menu AV2 Power indicator LED LINE OUT DC-IN Power AV1 ANT Note : Install the display unit using a mounting device. For details , refer to the operating instructions supplied with your mounting device . Making Connections A/V and Channel Setup Connecting to Antenna/Cable TV Watching Broadcast or Cable TV Antenna R L 2. Connect the other end of the VHF/UHF (Antenna) or CATV cable to the Antenna or CATV socket. VIDEO AV1 DC-IN ANT AV 2 S-VIDEO R LINE OUT L ANT jack (VHF/UHF IN jack) VIDEO AV1 DC-IN ANT AV 2 LINE OUT S-VIDEO 1. Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV. Antenna/CATV coaxial cable Connecting to a VCR, VCD,DVD Player,or Gaming Device 1. The illustration presented here shows you how to connect your TV to a VCR, VCD, DVD player or gaming device. VCR VCD R L DVD VIDEO AV1 DC-IN ANT AV 2 S-VIDEO R L LINE OUT VIDEO AV1 DC-IN ANT AV 2 S-VIDEO 2. The cables are color-coded (black, red, white, and yellow). Connect each colorcoded cable to the appropriate connector on your device. 4-IN-1 A/V cable AV connectors Connecting the Power Adapter Power outlet R L ANT LINE OUT Power cord R L 1. Connect the power cord to the power adapter as illustrated. VIDEO 2. Plug the power adapter connector into the DC-IN input jack on the rear panel of the TV. AV1 DC-IN ANT AV 2 S-VIDEO 1. Make sure your TV is turned on and a device such as a DVD player is connected. 2. Press the SOURCE button on the control panel to select different source signals. The channel number, "AV1" or "AV2" appears on the screen. Auto Channel Setup Please follow the instructions by using the control panel. 1. Press the MENU button to enter the OSD menu. 2. Use the CH button to select "TV". 3. Press VOL button into the "TV MENU". 4. Press CH button until the "AUTO PROGRAM" feature is selected. 5. Press VOL to begin "AUTO PROGRAM". 6. Your television will begin automatically memorizing the available channels. Auto Program TV MENU VIDEO AV1 DC-IN S-VIDEO Selecting A/V Sources LINE OUT S-Video connector AV 2 1. After you have made the appropriate power and source connections, press the power button to turn on your television. 2. Press the SOURCE button to select TV. 3. Press the MENU button to open the OSD menu. 4. Use the CH button to select "TV". 5. Press the VOL button to enter "TV MENU". 6. Press the VOL button to enter "TV/CATV". 7. Press the VOL button to select "TV" (broadcast TV) or "CATV" (cable TV). TV MENU CATV TV/CATV CH ADD/ERASE AUTO PROGRAM LINE OUT DC-IN Power adapter 3. Insert the three-pronged plug at the other end of the power cord into a power outlet. Copyright 2005, Hannspree California, Inc. All rights reserved. SEL ENTER MENU The NBA and individual NBA member team identifications reproduced on this product are trademarks and copyrighted designs, and/or other forms of intellectual property, that are the exclusive property of NBA Properties, Inc. and the respective NBA member teams and may not be used, in whole or in part, without the prior written consent of NBA Properties, Inc. All rights reserved. C 2005 NBA Properties, Inc. MAD-001131
