Transcript
Quick Start Guide ST03-15C1 15" Liquid Crystal Display TV This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions. Front View Rear View AV1 Speaker Speaker VOL MUTE MENU SOURCE DC-IN LINE OUT PC-IN R ANT L VIDEO AV2 CH Menu Mute Source Channel Volume select adjust Power AV1 DC-IN VOL MUTE MENU SOURCE LINE OUT PC-IN L PC-IN Power indicator LED Remote IR sensor Making Connections A/V and Channel Setup Connecting to Antenna/Cable TV Watching Broadcast or Cable TV 1. Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV. Antenna 2. Connect the other end of the VHF/UHF (Antenna) or CATV cable to the Antenna or CATV socket. AV1 DC-IN DC-IN LINE OUT LINE OUT PC-IN R ANT PC-IN L R ANT VIDEO L AV2 VIDEO ANT jack (VHF/UHF IN Jack) Antenna/CATV coaxial cable Connecting to a VCR, VCD, DVD Player, or Video Game Console 1. The illustration presented here shows you how to connect your TV to a VCR, VCD, DVD player or video game console. 4-IN-1 A/V jack VCR VCD DVD AV1 DC-IN LINE OUT PC-IN R ANT L VIDEO AV2 AV1 DC-IN LINE OUT PC-IN R ANT L VIDEO AV2 2. The cables are color-coded (black, red, white, and yellow). Connect each colorcoded cable to the appropriate connector on your device. Video Game Console S-Video connector AV connectors 4-IN-1 A/V cable Connecting the Power Adapter For NTSC System Only 1. After you have made the appropriate power and source connections, press the POWER button to turn on your television. 2. Press the SOURCE button to select TV mode. 3. Press the MENU button to enter the OSD menu. 4. Use the CH button to select "TV". 5. Press the VOL + button to enter TV setting. 6. Press the CH button to select "TV/CATV". 7. Press the VOL + button to select "TV" (broadcast TV) or "CATV" (cable TV). VOL MENU SOURCE CH Selecting A/V Sources TV 1. Make sure your TV is turned on and a device such as a DVD player is connected. 2. Press the SOURCE button on the control panel to select different source signals. TV/CATV, "AV1", "AV2" or "PC" appears on the screen. AV1 AV2 PC Auto Channel Setup VOL MUTE MENU SOURCE CH Please follow the instructions by using the control panel. 1. Press the MENU button to enter the OSD menu. 2. Use the CH button to select "TV". 3. Press VOL + button into the TV setting. 4. Press CH button until the "Auto Program" feature is selected. 5. Press VOL + to begin "Auto Program". 6. Your television will begin automatically memorizing the available channels. 1. Connect the power cord to the power adapter as illustrated. Auto Program 2. Plug the power adapter connector into the DC-IN input jack on the rear panel of the TV. Power outlet AV2 AV2 AV1 Line out Earphone jack VIDEO Antenna/ Cable TV DC-IN CH R ANT Auto Program AV1 DC-IN LINE OUT PC-IN R ANT L VIDEO 3. Insert the three-pronged plug at the other end of the power cord into a power outlet. AV2 AV1 DC-IN LINE OUT PC-IN ANT R L VIDEO AV2 Power cord DC-IN Power adapter Note : 1. For information on connecting your TV to a computer, refer to the user's manual. 2. Images are for illustration only and may vary by model or region. Copyright 2005, Hannspree, Inc. All rights reserved. Channel 12 55.25 MHz The NBA and individual NBA member team identifications reproduced on this product are trademarks and copyrighted designs, and/or other forms of intellectual property, that are the exclusive property of NBA Properties, Inc. and the respective NBA member teams and may not be used, in whole or in part, without the prior written consent of NBA Properties, Inc. All rights reserved. C 2005 NBA Properties, Inc. MAD-001345