Download GE WM7M Data Sheet
Transcript
GE Lighting Solutions Area Lighting Wallmount™ 175 (WM7M & WM7S) imagination at work Product Features For that extra security in an insecure world, GE Area Wallighters provide light were needed, on pathways, entrances, walkways, and building parameters. These area wallighters offer an attracitve, yet economical solution to those outdoor lighting needs where a wall-mounted fixture is the only practical choice. Applications Unique Features • • • • • • • • • Building perimeters, entrances, walkways, residential yards and loading docks Area lighting applications where a glass refractor is needed or desired Housing • Die-cast aluminum housing and door Finish • Dark bronze polyester powder finish • Electrocoat paint finish Rating • • / 1598 Listed Suitable for Wet Locations listed to Canadian National Standards and Codes Mounting • Multiple junction box mounting patterns (3.25 in. [83mm] octagonal, 4-in [102mm] octagonal, 2-in. X 4-in. [51X102mm] rectangle) Reflectors • • Prismatic borosilicate refractor “Snap-in” anodized aluminum reflector Standard and tamper-resistant hardware included Complete front acess to ballast and lamp Side-hinged front door Top .5 in. (13mm) threaded conduit entrance Knock-out for field installed photoelectric control kit (Order kit separately) Two socket sizes available: mogul base – E39 standard and medium base – E26 standard (lamp included with medium base) Enclosed and Gasketed Ordering Number Logic Wallmount™ 175 (WM7M & WM7S) _ _ _ _ - _ _ - _ - _ Light Source - _ ballast type selection - _ SN4 ___ - IES Distribution type PE Function Prod. ID wattage WM7M = Wallmount 175 Luminaire (Mogul Base E39 Socket Standard without Lamp) See Ballast and See Ballast and See Ballast and Photometric Photometric Photometric Selection Table Selection Table Selection Table See Ballast 1 = None and Photometric 3 = Internal Selection Table *PE control See Ballast and Photometric Selection Table 60Hz 0 = 120/208/ 240/277 Multivolt 1 = 120 2 = 208 3 = 240 4 = 277 5 = 480 C = 120x240x 277V D = 347 F = 120X347* T = 220 A = Autoreg * Not available H = HPF with multivolt Reactor or or 480V Lag K = Hot Restart* N = NPF Reactor or Lag SN4 = Short, Non-cutoff, Type IV WM7S = Wallmount 175 Luminaire (Medium Base E26 Socket Standard with Lamp) 05 =50 07 =70 10 =100 15 =150 (55V) 17 =175 Voltage E = Energy Act Compliant Pulse MH (EPMH) S = HPS M= MH P= PMH - __ color DB = Dark Bronze GR = Gray - _ OPTIONs B = Time Delay Automatically Switched Quartz F = Fusing—Not available with multivolt or 120X347 volt (Non-UL) L = Latch on door (Non-UL) *Available in WM7M only. (Non-UL) 50Hz 6 = 220 *NOTE: 120X347V connected for 120V Ballast and Photometric Selection Table All light sources are clear unless otherwise indicated. Ballast Type/Voltage 60Hz Ballast Type/Voltage 50Hz Light 208, 347, Wattage Source Multivolt 120 240, 480 277 120X347 220 220 IES Distribution Type Photometric Curve Number 35- WM7M Mogul Base Without Lamp 50, 70, 100, 150 (55V) 175 HPS MH H, N N/A H, K, N N/A H, N N/A H, N N/A H A H A H A SN4 SN4 177576 177580 WM7S Medium Base With Lamp 50, 70, 100, 150 (55V) 70, 100 HPS PMH H, N H H, N N/A N/A N/A H,N N/A N/A N/A* N/A N/A H H SN4 SN4 177576 177580 150**** PMH H*** H H H,A H,A N/A N/A SN4 177580 NOTE: N/A = Not Available. **347 available “H” ***150W PMH Available in Tri-Volt Multivolt: 120X208X277V or 120X240X277V ****150W PMH Only available in HPF-LAG (H) Ballast Type for 120 or 208 or 240 or 277V and Auto-Reg (A) in 120 or 277V Product Dimensions 4.375 in. (111 mm) .188 in. (5 mm) DIA KNOCKOUT FOR USE WITH GEMBOX (2 PLACES) .500 in. (13 mm) NPT CENTERLINE 5.774 in. (147 mm) .312 in. (8 mm) DIA KNOCKOUT (4 PLACES) .615 in. DIA (41 mm) DIA KNOCKOUT FOR PHOTOELECTRIC KIT 7.950 in. (202 mm) 9.750 in. (248 mm) 2.875 in. (73 mm) 1.312 in. (33 mm) 7.750 in. (197 mm) .875 in. (22 mm) DIA KNOCKOUT .188 in. (5 mm) DIA KNOCKOUT FOR USE WITH 3.000 in. (76 mm) OCTAGON BOX (4 PLACES) BACK VIEW D ATA .188 in. (5 mm) DIA KNOCKOUT FOR USE WITH 4.000 in. (102 mm) OCTAGON BOX (4 PLACES) SIDE VIEW .625 in. (16 mm) 12.625 in. (321 mm) FRONT VIEW • Approximate Net Weight: 20-25 lbs (9-11 kgs) • Suggested Mounting Height: 8-20 ft. (3-6 M) GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com 1-8 8 8 - 6 9 - 4 3-533 GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company. © 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. OLP-2952 (Rev. 06/19/12)