Download Garmin Software Version 0648.02 Cockpit Reference Guide
Transcript
SECTION 7 – NAVIGATION d) Turn the large FMS Knob to select the altitude constraint associated with FALUR as seen in Figure 7-35. Altitude constraint values associated with the Final Approach Fix (FAF) and waypoints beyond the FAF cannot be designated for vertical guidance. These altitude values will always be displayed as white text, as in Figure 7-36. Vertical guidance to the FAF and on to the Missed Approach Point (MAP) is given using the WAAS GPS altitude source, therefore, the displayed altitude values are for reference only. Figure 7-35 Designate FALUR Altitude Constraint e) Press the ENT Key to designate this altitude constraint value for use in computing vertical guidance. This altitude value will now be displayed as light blue text. Note that altitude values are now filled in for waypoints back to where the previous altitude value was entered for OPSHN. Figure 7-36 Vertical Guidance is Active to the FAF 14) As the aircraft approaches OPSHN, it may be desirable to adjust how fast, or steep, the upcoming descent will be. The default Flight Path Angle (FPA) is -3.0 degrees and a required vertical speed will be computed to maintain the -3.0 FPA. To change the vertical flight path, perform the following steps. Garmin G1000 Cockpit Reference Guide for the Piper PA32 7-15