Download Garmin Software Version 0648.02 Cockpit Reference Guide

SECTION 7 – NAVIGATION
Select an Airport from the Active Flight Plan
1) With the Airport Information Page displayed,
press the FMS Knob to activate the cursor.
2) Turn the small FMS Knob to the left to display
a list of flight plan airports as shown in Figure
7-54.
4) Turn the large FMS Knob to select the desired
airport.
5) Press the ENT Key.
Select a Recently Entered Airport Identifier
1) With the Airport Information Page displayed,
press the FMS Knob to activate the cursor.
2) Turn the small FMS Knob to the left. Initially, a
flight plan waypoint list is displayed as in Figure
7-54. The list is populated only when navigating
a flight plan.
Figure 7-54 Flight Plan Airport List
3) Turn the small FMS Knob to the right to display
the ‘RECENT’ airports as shown in Figure 7-56.
3) Turn the large FMS Knob to select the desired
airport.
4) Press the ENT Key.
Select a Nearest Airport
1) With the Airport Information Page displayed,
press the FMS Knob to activate the cursor.
2) Turn the small FMS Knob to the left. Initially, a
flight plan airport list is displayed as in Figure 754. The list is populated only when navigating
a flight plan.
Figure 7-56 Recently Entered Airports List
4) Turn the large FMS Knob to select the desired
airport.
5) Press the ENT Key.
Select an Airport by Facility Name or City Location
1) With the Airport Information Page displayed,
press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to select the facility
name or location (city) field.
3) Enter the desired facility name or city.
Figure 7-55 Nearest Airport List
3) Turn the small FMS Knob to the right to display
the ‘NRST’ airports to the aircraft’s current
position as shown in Figure 7-55.
5) Press the ENT Key. If there are duplicate names
in the database, a list is displayed from which to
choose the desired location.
6) To remove the flashing cursor, press the FMS
Knob.
Garmin G1000 Cockpit Reference Guide for the Piper PA32
7-23