Download Emerson T205B Data Sheet
Transcript
Bulletin 74.1:T205B Table 2. Outlet (Control) Pressure Ranges and Spring Information Outlet (Control) Pressure Range Inch w.c. mbar 1.0 to 2.5(1)(2) 2.5 to 7.0(2) 7.0 to 16.0 0.5 to 1.2 psig 1.2 to 2.5 psig 2.5 to 4.5 psig 4.5 to 7 psig 2.5 to 6.2(1)(2) 6.2 to 17(2) 17 to 40 34 to 83 83 to 172 0.17 to 0.31 bar 0.31 to 0.48 bar Spring Wire Diameter Spring Color Orange Red Unpainted Yellow Green Light Blue Black Spring Free Length Inch mm Inch mm 0.072 0.085 0.105 0.114 0.156 0.187 0.218 1.8 2.2 2.7 2.9 4.0 4.8 5.5 3.25 3.63 3.75 4.31 4.06 3.94 3.98 82.6 92.2 95.2 109 103 100 101 1. Do not use Fluorocarbon (FKM) diaphragm with this spring at diaphragm temperatures lower than 60°F / 16°C. 2. To achieve the published outlet pressure range the spring case must be installed pointing down. Table 3. Available Construction and Trim Materials Available construction materials Body and Casing Guide Insert Gray cast iron, WCC Carbon Steel, or CF8M/ CF3M Stainless steel(1) Diaphragm Head 316 Stainless steel 304 Stainless steel Lever Assembly and Bias Spring 302 Stainless steel Available trim options Stem Trim Option Diaphragm Material Code Disk and O-ring Material Operating Temperature Ranges Standard Fluorinated Ethylene Propylene (FEP) Nitrile (NBR) -20 to 180°F / -29 to 82°C NN Nitrile (NBR) Nitrile (NBR) -40 to 180°F / -40 to 82°C VV Fluorocarbon (FKM) Fluorocarbon (FKM) 40 to 300°F / 4 to 149°C TV Fluorinated Ethylene Propylene (FEP) Fluorocarbon (FKM) 40 to 180°F / 4 to 82°C TK Fluorinated Ethylene Propylene (FEP) Perfluoroelastomer (FFKM) 0 to 180°F / -18 to 82°C TE Fluorinated Ethylene Propylene (FEP) Ethylene Propylene Diene (EPDM) -20 to 180°F / -29 to 82°C Nitronic 60 ® 1. Pipe nipples and flanges are 316 Stainless steel for flanged body assemblies. Nitronic® is a registered trademark of AK Steel Corporation. Table 4. Type T205B Flow and Sizing Coefficients ORIFICE SIZE REGULATING WIDE-OPEN Inch mm Cg Cv C1 Cg Cv C1 3/8 9.5 98 2.8 34.6 101 2.9 34.6 Table 5. Flow Rate Conversion Multiply Maximum Pump Rate In BY U.S. GPM 8.021 U.S. GPH 0.1337 Barrels/hour 5.615 Barrels/day 0.2340 TO OBTAIN SCFH air required(1) 1. To convert to Nm3/h multiply SCFH by 0.0268. 5