Download Emerson NetSure 802 DC Power System Application Guide

Section 5877
Issue AQ, January 15, 2013
User Instructions
Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B)
CONFIGURING BATTERY CHARGE DIGITAL
TEMPERATURE COMPENSATION SLOPE
Note: The Temperature Compensation feature requires Power Share to be turned off.
1) All controls are located on the MCA Interface Pad.
2) With SYSTEM OK being displayed on the MCA Interface Pad, press and release
the FUNCTION SET ENTER key. The FUNCTION MENU is displayed.
or
In the MAIN ALARM MENU, repeatedly press and release the FUNCTION
SELECT DOWN arrow key until "GO TO FUNCTION MENU" is displayed. Press
and release the FUNCTION SET ENTER key. The FUNCTION MENU is
displayed.
3) Repeatedly press and release the FUNCTION SELECT DOWN arrow key until
"CHANGE CONFIGURATION PARAMETERS" is displayed.
4) Press and release the FUNCTION SET ENTER key.
5) Repeatedly press and release the FUNCTION SELECT DOWN arrow key until
"NO TEMPERATURE COMPENSATION” or “TEMPERATURE SLOPE =
0.vvvV C/F" is displayed.
6) Press and release the ALARM CUTOFF and FUNCTION SET ENTER keys
simultaneously.
7) Observe the value displayed. This is the Battery Charge Digital Temperature
Compensation slope setting. To change this value, press and hold the
FUNCTION SET YES (+) or NO (-) key. Release the key when the desired value
is displayed.
Note: Refer to Battery and Equipment Manufacturers’ recommendations or site
requirements for the value. Note that this is the compensation for the
entire battery string, not per battery cell.
8) With the desired slope value being displayed, press and release the FUNCTION
SET ENTER key.
9) “ARE YOU SURE?” is displayed. Press and release the FUNCTION SET YES
(+) key.
Note: The slope value will not be changed and the adjustment mode will be
exited if the FUNCTION SET YES (+) key is not pressed within 10
seconds of the “ARE YOU SURE?” prompt.
10) Press and release the FUNCTION SET YES (+) and NO (-) keys simultaneously,
to return to the beginning of the MCA menu tree.
Page 4-18
Chapter 4. MCA System Adjustments
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.