Download Dell PowerConnect W-IAP104/105 CLI Reference Guide

Parameter
Description
Range
Default
sensitivity. This level is recommended for
environments with a high-level of
interference related to 2.4 GHz
appliances such as cordless phones.
l Level 4— Level 3 settings, and FIR
immunity. At this level, the AP adjusts its
sensitivity to in-band power, which can
improve performance in environments
with high and constant levels of noise
interference.
l Level 5— The AP completely disables
PHY error reporting, improving
performance by eliminating the time the
W-IAP would spend on PHY processing.
NOTE: Increasing the immunity level makes
the AP to lose a small amount of range.
legacy-mode
Enables the W-IAPs to run the radio in non802.11n mode.
—
Disabled
max-distance <count>
Configures the maximum distance between
a client and an AP or between a mesh point
and a mesh portal in meters. This value is
used to derive ACK and CTS timeout times.
600-1000
0
A value of 0 specifies the default settings for
this parameter, where timeouts are only
modified for outdoor mesh radios which use
a distance of 16km.
spectrum-band <type>
Allows you to specify the portion of the
channel to monitor for 5 GHz configuration.
—
—
spectrum-monitor
Allows the W-IAPs in access mode to
continue with normal access service to
clients, while performing additional function
of monitoring RF interference (from both
neighboring APs and non Wi-Fi sources
such as, microwaves and cordless phones)
on the channel they are currently serving
clients.
—
—
no…
Removes the configuration.
—
—
Usage Guidelines
Use this command to create a 5.0 GHz radio profile on a W-IAP.
Example
The following example configures the 5 GHz radio profile:
(Instant
(Instant
(Instant
(Instant
(Instant
(Instant
(Instant
(Instant
Access
Access
Access
Access
Access
Access
Access
Access
156 | rf dot11a-radio-profile
Point)(config)# rf dot11a-radio-profile
Point)(RF dot11a Radio Profile)# beacon-interval 100
Point)(RF dot11a Radio Profile)# legacy-mode
Point)(RF dot11a Radio Profile)# dot11h
Point)(RF dot11a Radio Profile)# interference-immunity 3
Point)(RF dot11a Radio Profile)# max-distance 600
Point)(RF dot11a Radio Profile)# csa-count 2
Point)(RF dot11a Radio Profile)# spectrum-monitor
Dell Networking W-Series Instant 6.2.1.0-3.4 | CLI Reference Guide