Download Dell OpenManage Server Administrator Managed Node for Fluid Cache for DAS Command Line Interface Guide

Example Syntax
The omconfig command syntax for enabling thermal shutdown does not
require that you specify a controller or enclosure ID. To enable thermal
shutdown, type the following:
omconfig storage globalinfo action=enablests
NOTE: You can use the omreport storage globalinfo command to determine
whether smart thermal shutdown is currently enabled or disabled. The status of
smart thermal shutdown is also displayed by the Server Administrator graphical
user interface (GUI). To locate this status, select the Storage object and the
Information/Configuration tab.
omconfig Global Disable Smart Thermal Shutdown
If you have previously enabled smart thermal shutdown using the omconfig
command, you can disable smart thermal shutdown and return the system to
its default setting. When smart thermal shutdown is disabled, the operating
system and the server shuts down when the PV220S and PV221S enclosures
reach a critical temperature of 0 or 50 degree Celsius.
Use the following omconfig command syntax to disable smart thermal
shutdown for all controllers.
Complete Syntax
omconfig storage globalinfo action=disablests
Example Syntax
The omconfig command syntax for disabling thermal shutdown does not
require that you specify a controller or enclosure ID. To disable thermal
shutdown, type the following:
omconfig storage globalinfo action=disablests
NOTE: You can use the omreport storage globalinfo command to determine
whether smart thermal shutdown is currently enabled or disabled. The status of
smart thermal shutdown is also displayed in the GUI of Server Administrator. To
locate this status, select the Storage object and the Information/Configuration tab.
284
omconfig storage Commands